x86: broadwell: Add support for SDRAM setup

Broadwell uses a binary blob called the memory reference code (MRC) to start
up its SDRAM. This is similar to ivybridge so we can mostly use common code
f

x86: broadwell: Add support for SDRAM setup

Broadwell uses a binary blob called the memory reference code (MRC) to start
up its SDRAM. This is similar to ivybridge so we can mostly use common code
for running this blob.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add power-control support

Broadwell requires quite a bit of power-management setup. Add code to set
this up correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Me

x86: broadwell: Add power-control support

Broadwell requires quite a bit of power-management setup. Add code to set
this up correctly.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>
[squashed in http://patchwork.ozlabs.org/patch/598373/]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add reference code support

Broadwell needs a special binary blob to set up the PCH. Add code to run
this on start-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Men

x86: broadwell: Add reference code support

Broadwell needs a special binary blob to set up the PCH. Add code to run
this on start-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add an LPC driver

Add a driver for the broadwell LPC (low-pin-count peripheral). This mostly
uses common code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmen

x86: broadwell: Add an LPC driver

Add a driver for the broadwell LPC (low-pin-count peripheral). This mostly
uses common code.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add a northbridge driver

Add a driver for the broadwell northbridge. This sets up the location of
several blocks of registers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by

x86: broadwell: Add a northbridge driver

Add a driver for the broadwell northbridge. This sets up the location of
several blocks of registers.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add a SATA driver

Add a SATA driver for broadwell. This supports connecting an SSD and the
usual U-Boot commands to read and write data.

Signed-off-by: Simon Glass <sjg@chromium.org

x86: broadwell: Add a SATA driver

Add a SATA driver for broadwell. This supports connecting an SSD and the
usual U-Boot commands to read and write data.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add a pinctrl driver

GPIO pins need to be set up on start-up. Add a driver to provide this,
configured from the device tree.

The binding is slightly different from the existing ICH6

x86: broadwell: Add a pinctrl driver

GPIO pins need to be set up on start-up. Add a driver to provide this,
configured from the device tree.

The binding is slightly different from the existing ICH6 binding, since that
is quite verbose. The new binding should be just as extensible.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: broadwell: Add a PCH driver

Add a driver for the broadwell low-power platform controller hub.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

x86: Add basic support for broadwell

This adds the broadwell architecture, with the CPU driver and some useful
header files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.

x86: Add basic support for broadwell

This adds the broadwell architecture, with the CPU driver and some useful
header files.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Update microcode for secondary CPUs

Each CPU needs to have its microcode loaded. Add support for this so that
all CPUs will have the same version.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: Update microcode for secondary CPUs

Each CPU needs to have its microcode loaded. Add support for this so that
all CPUs will have the same version.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: ivybridge: Show microcode version for each core

Enable the microcode feature so that the microcode version is shown with the
'cpu detail' command.

Signed-off-by: Simon Glass <sjg@chromium.org>

x86: ivybridge: Show microcode version for each core

Enable the microcode feature so that the microcode version is shown with the
'cpu detail' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Record the CPU details when starting each core

As each core starts up, record its microcode version and CPU ID so these can
be presented with the 'cpu detail' command.

Signed-off-by: Simon Gla

x86: Record the CPU details when starting each core

As each core starts up, record its microcode version and CPU ID so these can
be presented with the 'cpu detail' command.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Move common MRC Kconfig options to the common file

At present the MRC options are private to ivybridge. Other Intel CPUs also
use these settings. Move them to a common place.

Signed-off-by: Si

x86: Move common MRC Kconfig options to the common file

At present the MRC options are private to ivybridge. Other Intel CPUs also
use these settings. Move them to a common place.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Move Intel Management Engine code to a common place

Some of the Intel ME code is common to several Intel CPUs. Move it into a
common location. Add a header file for report_platform.c also.

Sig

x86: Move Intel Management Engine code to a common place

Some of the Intel ME code is common to several Intel CPUs. Move it into a
common location. Add a header file for report_platform.c also.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
[squashed in http://patchwork.ozlabs.org/patch/598372/]
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Rename PORT_RESET to IO_PORT_RESET

This same name is used in USB. Add a prefix to distinguish it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

x86: Move common CPU code to its own place

Some of the Intel CPU code is common to several Intel CPUs. Move it into a
common location along with required declarations.

Signed-off-by: Simon Glass <s

x86: Move common CPU code to its own place

Some of the Intel CPU code is common to several Intel CPUs. Move it into a
common location along with required declarations.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Move common LPC code to its own place

Some of the LPC code is common to several Intel LPC devices. Move it into a
common location.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bi

x86: Move common LPC code to its own place

Some of the LPC code is common to several Intel LPC devices. Move it into a
common location.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Add the root-complex block to common intel registers

This is similar to MCH in that it is used in various drivers. Add it to
the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
Re

x86: Add the root-complex block to common intel registers

This is similar to MCH in that it is used in various drivers. Add it to
the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Create a common header for Intel register access

There are several blocks of registers that are accessed from all over the
code on Intel CPUs. These don't currently have their own driver and it

x86: Create a common header for Intel register access

There are several blocks of registers that are accessed from all over the
code on Intel CPUs. These don't currently have their own driver and it is
not clear whether having a driver makes sense.

An example is the Memory Controller Hub (MCH). We map it to a known location
on some Intel chips (mostly those without FSP - Firmware Support Package).

Add a new header file for these registers, and move MCH into it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Move microcode code to a common location

This code is used on several Intel CPUs. Move it into a common location.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@

x86: Move microcode code to a common location

This code is used on several Intel CPUs. Move it into a common location.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Move cache-as-RAM code into a common location

This cache-as-RAM (CAR) code is common to several Intel chips. Create a new
intel_common directory and move it in there.

Signed-off-by: Simon Glas

x86: Move cache-as-RAM code into a common location

This cache-as-RAM (CAR) code is common to several Intel chips. Create a new
intel_common directory and move it in there.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: cpu: Add functions to return the family and stepping

These two identifiers can be useful for drivers which need to adjust their
behaviour depending on the CPU family or stepping (revision).

Si

x86: cpu: Add functions to return the family and stepping

These two identifiers can be useful for drivers which need to adjust their
behaviour depending on the CPU family or stepping (revision).

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Add comments to the SIPI vector

The Intel SIPI (start-up inter-processor interrupt) vector is the entry
point for each secondary CPU (also called an AP - applications processor).
The assembler

x86: Add comments to the SIPI vector

The Intel SIPI (start-up inter-processor interrupt) vector is the entry
point for each secondary CPU (also called an AP - applications processor).
The assembler and C code are linked, so add comments to indicate this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Tidy up mp_init to reduce duplication

The timeout step is always 50us. By updating apic_wait_timeout() to print
the debug messages we can simplify the code. Also tidy up a few messages and
comm

x86: Tidy up mp_init to reduce duplication

The timeout step is always 50us. By updating apic_wait_timeout() to print
the debug messages we can simplify the code. Also tidy up a few messages and
comments while we are here.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...

x86: Add some more common MSR indexes

Many of the model-specific indexes are common to several Intel CPUs. Add
some more common ones, and remove them from the ivybridge-specific header
file.

Signed

x86: Add some more common MSR indexes

Many of the model-specific indexes are common to several Intel CPUs. Add
some more common ones, and remove them from the ivybridge-specific header
file.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>

show more ...