ppc: Move fpga_state to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Remove console_addr from global data

This does not appear to be used, so punt it.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move mirror_hack to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

arm: Move uart_clk to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move dp_alloc_base, dp_alloc_top to arch_global_data

Move these fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move arbiter fields to arch_global_data

Move arbiter_event_attributes and arbiter_event_address into
arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move reset_status to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move mpc8220 clocks to arch_global_data

Move these fields into arch_global_data and tidy up. The bExtUart field
does not appear to be used, so punt it.

Signed-off-by: Simon Glass <sjg@chromium

ppc: Move mpc8220 clocks to arch_global_data

Move these fields into arch_global_data and tidy up. The bExtUart field
does not appear to be used, so punt it.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

ppc: Move mpc512x clocks to arch_global_data

Move ips_clk and csb_clk into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move mpc5xxx clocks to arch_global_data

Move ipb_clk and pci_clk into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move used_tlb_cams to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move used_laws to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move CONFIG_QE to arch_global_data

Move the quantative easing fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data

Move these fields into arch_global_data and tidy up. This is needed for
both ppc and m68k since they share the i2c driver.

Signed-off-by: Simo

ppc: m68k: Move i2c1_clk, i2c2_clk to arch_global_data

Move these fields into arch_global_data and tidy up. This is needed for
both ppc and m68k since they share the i2c driver.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

ppc: Move lbc_clk and cpu to arch_global_data

Move these fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Update for bsc9132qds.c, b4860qds.c]
Signed-

ppc: Move lbc_clk and cpu to arch_global_data

Move these fields into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Update for bsc9132qds.c, b4860qds.c]
Signed-off-by: Tom Rini <trini@ti.com>

show more ...

ppc: Move mpc83xx clock fields to arch_global_data

Move al mpc83xx fields into arch_global_data and tidy up. Also indent
the nested #ifdef for clarity.

Signed-off-by: Simon Glass <sjg@chromium.org>

ppc: Move clock fields to arch_global_data

Move vco_out, cpm_clk, scc_clk, brg_clk into arch_global_data and tidy
up. Leave pci_clk on its own since this should really depend only on
CONFIG_PCI and

ppc: Move clock fields to arch_global_data

Move vco_out, cpm_clk, scc_clk, brg_clk into arch_global_data and tidy
up. Leave pci_clk on its own since this should really depend only on
CONFIG_PCI and not any particular chip type.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

ppc: Remove extra pci_clk fields from global_data

PPC has several of these fields, selected by chip type, although only one
is ever compiled in.

Instead, use a single field. It would be nice if thi

ppc: Remove extra pci_clk fields from global_data

PPC has several of these fields, selected by chip type, although only one
is ever compiled in.

Instead, use a single field. It would be nice if this could be selected
by CONFIG_PCI, but some chips (e.g. mpc5xxx) use pci_clk even when
CONFIG_PCI is not enabled.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

ppc: Move brg_clk to arch_global_data

Move this field into arch_global_data and tidy up.

Signed-off-by: Simon Glass <sjg@chromium.org>

Add architecture-specific global data

We plan to move architecture-specific data into a separate structure so
that we can make the rest of it common.

As a first step, create struct arch_global_data

Add architecture-specific global data

We plan to move architecture-specific data into a separate structure so
that we can make the rest of it common.

As a first step, create struct arch_global_data to hold these fields.
Initially it is empty.

This patch applies to all archs at once. I can split it if this is really
a pain.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot

mpc83xx: add support for mpc8309

This processor, though very similar to other members of the
PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides
yet another feature set than any supporte

mpc83xx: add support for mpc8309

This processor, though very similar to other members of the
PowerQUICC II Pro family (namely 8308, 8360 and 832x), provides
yet another feature set than any supported sibling.

Signed-off-by: Gerlando Falauto <gerlando.falauto@keymile.com>
Signed-off-by: Kim Phillips <kim.phillips@freescale.com>

show more ...

powerpc: Change bi_baudrate and global data baudrate to int

These don't need to be longs, so change them.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@ti.com>

global_data: unify global flag defines

All the global flag defines are the same across all arches. So unify them
in one place, and add a simple way for arches to extend for their needs.

Signed-off

global_data: unify global flag defines

All the global flag defines are the same across all arches. So unify them
in one place, and add a simple way for arches to extend for their needs.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

show more ...

POST: add post_log_res field for post results in global data

The current post_log_word in global data is currently split into 2x
16 bits: half for the test start, half for the test success.
Since we

POST: add post_log_res field for post results in global data

The current post_log_word in global data is currently split into 2x
16 bits: half for the test start, half for the test success.
Since we alredy have more than 16 POST tests defined and more could
be defined, this may result in an overflow and the post_output_backlog
would not work for the tests defined further of these 16 positions.

An additional field is added to global data so that we can now support up
to 32 (depending of architecture) tests. The post_log_word is only used
to record the start of the test and the new field post_log_res for the
test success (or failure). The post_output_backlog is for this change
also adapted.

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>

show more ...