usb: lowlevel interface change to support multiple controllers

Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct fro

usb: lowlevel interface change to support multiple controllers

Carry an index in the lowlevel usb functions to make specify the
respective usb controller.

Also pass through an controller struct from lowlevel_init to the
creation of the root usb device of this controller.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
Reviewed-by: Marek Vasut <marex@denx.de>

show more ...

ppc4xx: Remove AP1000 board support

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: James MacAulay

ppc4xx: Remove AP1000 board support

As the board seems to be unmaintained for some time, lets remove
the support in mainline completely.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: James MacAulay <james.macaulay@amirix.com>
Acked-by: Marek Vasut <marex@denx.de>

show more ...

ppc4xx: Remove IOP480 support

Since the IOP480 (PPC401/3 variant from PLX) is only used on 2
boards that are not actively maintained, lets remove support
for it completely. This way the ppc4xx code

ppc4xx: Remove IOP480 support

Since the IOP480 (PPC401/3 variant from PLX) is only used on 2
boards that are not actively maintained, lets remove support
for it completely. This way the ppc4xx code will get a bit cleaner.

Signed-off-by: Stefan Roese <sr@denx.de>
Acked-by: Matthias Fuchs <matthias.fuchs@esd.eu>
Acked-by: Marek Vasut <marex@denx.de>

show more ...

serial: Remove CONFIG_SERIAL_MULTI from serial drivers

Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by

serial: Remove CONFIG_SERIAL_MULTI from serial drivers

Remove the support for not-CONFIG_SERIAL_MULTI part from serial
port drivers and some board files. Since CONFIG_SERIAL_MULTI is
now enabled by default, that part is a dead code. Remove it.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>

show more ...

serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driver

Implement support for CONFIG_SERIAL_MULTI into iop480 serial driver.
This driver was so far only usable directly, but this pa

serial: powerpc: Implement CONFIG_SERIAL_MULTI into iop480 serial driver

Implement support for CONFIG_SERIAL_MULTI into iop480 serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the iop480 driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

show more ...

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial driver

Implement support for CONFIG_SERIAL_MULTI into mpc85xx serial driver.
This driver was so far only usable directly, but this

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc85xx serial driver

Implement support for CONFIG_SERIAL_MULTI into mpc85xx serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the mpc85xx driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

show more ...

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial drivers

Implement support for CONFIG_SERIAL_MULTI into both SCC and SMC mpc8260
serial drivers. These drivers were so far only usab

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8260 serial drivers

Implement support for CONFIG_SERIAL_MULTI into both SCC and SMC mpc8260
serial drivers. These drivers were so far only usable directly, but this
patch also adds support for the multi method. This allows using more than
one serial driver alongside the mpc8260 drivers. Also, add a weak
implementation of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

show more ...

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial driver

Implement support for CONFIG_SERIAL_MULTI into mpc8220 serial driver.
This driver was so far only usable directly, but this

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc8220 serial driver

Implement support for CONFIG_SERIAL_MULTI into mpc8220 serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the mpc8220 driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

show more ...

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driver

Implement support for CONFIG_SERIAL_MULTI into mpc5xx serial driver.
This driver was so far only usable directly, but this pa

serial: powerpc: Implement CONFIG_SERIAL_MULTI into mpc5xx serial driver

Implement support for CONFIG_SERIAL_MULTI into mpc5xx serial driver.
This driver was so far only usable directly, but this patch also adds
support for the multi method. This allows using more than one serial
driver alongside the mpc5xx driver. Also, add a weak implementation
of default_serial_console() returning this driver.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

show more ...

serial: mpc512x: Move serial registration from serial_initialize()

Move the registration of serialN_device ports from default
serial_initialize() into driver specific function called from
serial_ini

serial: mpc512x: Move serial registration from serial_initialize()

Move the registration of serialN_device ports from default
serial_initialize() into driver specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The newly implemented mpc512x_serial_initialize() function, which is
implemented inside of the mpc512x serial driver allows encapsulation
of serialN_device within the mpc512x serial driver itself.

Also, remove the exports of serialN_device from include/serial.h
as they are no longer needed. This is simply because the implementation of
default_serial_console() is wrapped into the mpx512x serial driver and
the default console is picked by CONFIG_SERIAL<N> macro in config file.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>

show more ...

serial: mpc8xx: Move serial registration from serial_initialize()

Move the registration of serial_smc and serial_scc ports from
default serial_initialize() into CPU specific function called from
ser

serial: mpc8xx: Move serial registration from serial_initialize()

Move the registration of serial_smc and serial_scc ports from
default serial_initialize() into CPU specific function called from
serial_initialize(). This slims down the serial_initialize() call
to a bare tracker of all possible serial port registration routines
in U-Boot.

The exports of both serial_scc_device and serial_smc_device can
not yet be removed as they are still used in default_serial_console()
calls.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>

show more ...

serial: Properly spell out the structure member names of serial_driver

Properly spell out the whole structure member names when an initialized
varible is instantiated from the struct serial_driver.

serial: Properly spell out the structure member names of serial_driver

Properly spell out the whole structure member names when an initialized
varible is instantiated from the struct serial_driver. In case the
structure definition for struct serial_driver undergoes reordering,
there will be no impact on variables defined based on this structure.

Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Marek Vasut <marek.vasut@gmail.com>
Cc: Tom Rini <trini@ti.com>
Cc: Anatolij Gustschin <agust@denx.de>
Cc: Stefan Roese <sr@denx.de>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: C Nauman <cnauman@diagraph.com>
Cc: Minkyu Kang <mk7.kang@samsung.com>
Cc: Michal Simek <monstr@monstr.eu>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx

mpc5xxx: add GPIO port configuration

Add posibility for board specifig GPIO configurations using
various CONFIG_SYS_ macros.

Signed-off-by: Anatolij Gustschin <agust@denx.de>

powerpc/85xx: clear out TLB on boot

Instead of just shooting down the entry that covers CCSR, clear out
every TLB entry that isn't the one that we're executing out of.

Signed-off-by: Scott Wood <sc

powerpc/85xx: clear out TLB on boot

Instead of just shooting down the entry that covers CCSR, clear out
every TLB entry that isn't the one that we're executing out of.

Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx: Move HWCONFIG_BUFFER_SIZE into config.h

Before proper environment is setup, we extract hwconfig and put it into a
buffer with size HWCONFIG_BUFFER_SIZE. We need to enlarge the buffe

powerpc/mpc8xxx: Move HWCONFIG_BUFFER_SIZE into config.h

Before proper environment is setup, we extract hwconfig and put it into a
buffer with size HWCONFIG_BUFFER_SIZE. We need to enlarge the buffer to
accommodate longer string. Since this macro is used in multiple files, we
move it into arch/powerpc/include/asm/config.h.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx DDR: Fix interactive DDR debugging

Add one more argument to call function readline_into_buffer().
Fix print SPD format for negative values.

Signed-off-by: York Sun <yorksun@freescal

powerpc/mpc8xxx DDR: Fix interactive DDR debugging

Add one more argument to call function readline_into_buffer().
Fix print SPD format for negative values.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx DDR: Fall back to raw timing for first controller only

Only the first DIMM of first controller should fall back to raw timing
parameters if SPD is missing or corrupted.

Signed-off-b

powerpc/mpc8xxx DDR: Fall back to raw timing for first controller only

Only the first DIMM of first controller should fall back to raw timing
parameters if SPD is missing or corrupted.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx DDR: Fix CAS latency calculation

Empty slot should be skipped when calculating CAS latency.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@fre

powerpc/mpc8xxx DDR: Fix CAS latency calculation

Empty slot should be skipped when calculating CAS latency.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx: Fix bug for extended DDR timing

Faster DDR3 timing requires parameters exceeding previously defined
range. Extended parameters are fixed. Added some debug messages.

Signed-off-by:

powerpc/mpc8xxx: Fix bug for extended DDR timing

Faster DDR3 timing requires parameters exceeding previously defined
range. Extended parameters are fixed. Added some debug messages.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx: Enable 3-way and 4-way DDR interleaving

Restructure DDR interleaving option to support 3 and 4 DDR controllers
for 2-, 3- and 4-way interleaving.

Signed-off-by: York Sun <yorksun@f

powerpc/mpc8xxx: Enable 3-way and 4-way DDR interleaving

Restructure DDR interleaving option to support 3 and 4 DDR controllers
for 2-, 3- and 4-way interleaving.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx: Add support for cas latency 12 and above

Required by JEDEC 79-3E for high speed DDR3.
Also change "CSn disabled" message to debug.

Signed-off-by: York Sun <yorksun@freescale.com>
S

powerpc/mpc8xxx: Add support for cas latency 12 and above

Required by JEDEC 79-3E for high speed DDR3.
Also change "CSn disabled" message to debug.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx: Add fine timing support for DDR3

When the DDR3 speed goes higher, we need to utilize fine offset
from SPD.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Flemi

powerpc/mpc8xxx: Add fine timing support for DDR3

When the DDR3 speed goes higher, we need to utilize fine offset
from SPD.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc85xx: Skip zero values for DDR debug registers

Some debug registers have non-zero default out of reset. If software is
not setting debug registers, skip writing to them to avoid unnecessa

powerpc/mpc85xx: Skip zero values for DDR debug registers

Some debug registers have non-zero default out of reset. If software is
not setting debug registers, skip writing to them to avoid unnecessary
overriding.

Also add debug messages for workarounds and debug registers.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...

powerpc/mpc8xxx: fix core id for multicore booting

For the cores with multiple threads, we need to figure out which physical
core a thread belongs. To match the core ids, update PIR registers and
sp

powerpc/mpc8xxx: fix core id for multicore booting

For the cores with multiple threads, we need to figure out which physical
core a thread belongs. To match the core ids, update PIR registers and
spin tables.

Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Andy Fleming <afleming@freescale.com>

show more ...