UPSTREAM: arm: sunxi: Move spl spi sunxi code to mach-sunxi

This SUNXI variant SPL SPI code doesn't use either SPI or
SPL_FLASG subsystems due to size constraints and also placing
this code in drive

UPSTREAM: arm: sunxi: Move spl spi sunxi code to mach-sunxi

This SUNXI variant SPL SPI code doesn't use either SPI or
SPL_FLASG subsystems due to size constraints and also placing
this code in drivers/mtd/spi will unnecessary build SPI_FLASH
code(if defined) which never required, hence moved to arch area.

And also renamed the file according to kconfig which resembles
proper name.

Change-Id: I0bf18e93d26bc1b80d3dfa7219a2a904ed17085a
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Jon Lin <jon.lin@rock-chips.com>
(cherry picked from commit c2a7a7ef866f2980213fee2a4a0df60fb06db6d0)

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

sunxi: Enable MMC new mode for A83T

The eMMC controller for the A83T uses the new operating mode. Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki

sunxi: Enable MMC new mode for A83T

The eMMC controller for the A83T uses the new operating mode. Enable it.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...

env: Convert CONFIG_ENV_IS_IN... to a choice

At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
siz

env: Convert CONFIG_ENV_IS_IN... to a choice

At present we support multiple environment drivers but there is not way to
select between them at run time. Also settings related to the position and
size of the environment area are global (i.e. apply to all locations).

Until these limitations are removed we cannot really support more than one
environment location. Adjust the location to be a choice so that only one
can be selected. By default the environment is 'nowhere', meaning that the
environment exists only in memory and cannot be saved.

Also expand the help for the 'nowhere' option and move it to the top since
it is the default.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Move all of the imply logic to default X if Y so it works again]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-rockchip

spl: add hierarchical defaults for SPL_LDSCRIPT

With SPL_LDSCRIPT moved to Kconfig (and this being a 'string' config
node), all the lingering definitions in header files will cause
warnings/errors d

spl: add hierarchical defaults for SPL_LDSCRIPT

With SPL_LDSCRIPT moved to Kconfig (and this being a 'string' config
node), all the lingering definitions in header files will cause
warnings/errors due to the redefinition of the configuration item.

As we don't want to pollute the defconfig files (and values should
usually be identical for entire architectures), the defaults are moved
into Kconfig. Kconfig will always pick the first default that
matches, so please keep these values at the end of each file (to allow
any board-specific Kconfig, which will be included earlier) to
override with an unconditional default setting.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHERE

Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig

This converts the following to Kconfig:
CONFIG_ENV_IS_IN_MMC
CONFIG_ENV_IS_IN_NAND
CONFIG_ENV_IS_IN_UBI
CONFIG_ENV_IS_NOWHERE

In fact this already exists for sunxi as a 'choice' config. However not
all the choices are available in Kconfig yet so we cannot use that. It
would lead to more than one option being set.

In addition, one purpose of this series is to allow the environment to be
stored in more than one place. So the existing choice is converted to a
normal config allowing each option to be set independently.

There are not many opportunities for Kconfig updates to reduce the size of
this patch. This was tested with

./tools/moveconfig.py -i CONFIG_ENV_IS_IN_MMC

And then manual updates. This is because for CHAIN_OF_TRUST boards they
can only have ENV_IS_NOWHERE set, so we enforce that via Kconfig logic
now.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

sunxi: add LPDDR3 timing from stock boot0

As we added LPDDR3 support in the former patch, we need a set of timing
info to really enable it.

Add the timing info used by stock boot0.

Signed-off-by:

sunxi: add LPDDR3 timing from stock boot0

As we added LPDDR3 support in the former patch, we need a set of timing
info to really enable it.

Add the timing info used by stock boot0.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller

Some A64 boards (SoPine and Pinebook production batch) use LPDDR3 DRAM
chips.

Add support for LPDDR3 DRAM in the DesignWare-l

sunxi: add LPDDR3 DRAM type support for DesignWare-like DRAM controller

Some A64 boards (SoPine and Pinebook production batch) use LPDDR3 DRAM
chips.

Add support for LPDDR3 DRAM in the DesignWare-like DRAM controller code.

Real LPDDR3 chips' support is not added yet in this commit.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: enable DRAM initialization and SPL for V3s SoC

As we have already support for the DesignWare DRAM controller and the
integrated DDR2 chip of V3s, let's enable the SPL support for V3s.

This p

sunxi: enable DRAM initialization and SPL for V3s SoC

As we have already support for the DesignWare DRAM controller and the
integrated DDR2 chip of V3s, let's enable the SPL support for V3s.

This patch also contains the default DRAM configuration for V3s.

Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: add support for V3s DRAM controller

Allwinner V3s features a DRAM controller like the on in H3, but with a
DDR2 DRAM.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Rev

sunxi: add support for V3s DRAM controller

Allwinner V3s features a DRAM controller like the on in H3, but with a
DDR2 DRAM.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: add support for the DDR2 in V3s SoC

Allwinner V3s SoC features a co-packaged DDR2 DRAM chip, which needs its
timing param.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz

sunxi: add support for the DDR2 in V3s SoC

Allwinner V3s SoC features a co-packaged DDR2 DRAM chip, which needs its
timing param.

Add support for it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: Add selective DRAM type and timing

DRAM chip varies, and one code cannot satisfy all DRAMs.

Add options to select a timing set.

Currently only DDR3-1333 (the original set) is added into it.

sunxi: Add selective DRAM type and timing

DRAM chip varies, and one code cannot satisfy all DRAMs.

Add options to select a timing set.

Currently only DDR3-1333 (the original set) is added into it.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: add option for 16-bit DW DRAM controller

Some Allwinner SoCs features a DesignWare-like controller with only 16
bit bus width.

Add support for them.

Signed-off-by: Icenowy Zheng <icenowy@ao

sunxi: add option for 16-bit DW DRAM controller

Some Allwinner SoCs features a DesignWare-like controller with only 16
bit bus width.

Add support for them.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

sunxi: makes an invisible option for H3-like DRAM controllers

Allwinner SoCs after H3 (e.g. A64, H5, R40, V3s) uses a H3-like
DesignWare DRAM controller, which do not have official free DRAM
initial

sunxi: makes an invisible option for H3-like DRAM controllers

Allwinner SoCs after H3 (e.g. A64, H5, R40, V3s) uses a H3-like
DesignWare DRAM controller, which do not have official free DRAM
initialization code, but can use modified dram_sun8i_h3.c.

Add a invisible option for easier DRAM initialization code reuse.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>

show more ...

Merge git://git.denx.de/u-boot-sunxi

trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom

Merge git://git.denx.de/u-boot-sunxi

trini: Make Kconfig SPL_xxx entires only show if SPL, so that we don't
get Kconfig errors on platforms without SPL, ie sandbox (without SPL).

Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

sunxi: enable automatic FIT build for 64-bit SoCs

The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary,
which needs to be loaded alongside U-Boot proper.
Set the respective Kconfi

sunxi: enable automatic FIT build for 64-bit SoCs

The Allwinner SoCs with 64-bit cores use an ARM Trusted Firmware binary,
which needs to be loaded alongside U-Boot proper.
Set the respective Kconfig options to let them select this feature and
also automatically build the FIT image.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[Rename Kconfig path to arch/arm/mach-sunxi/Kconfig]
Signed-off-by: Jagan Teki <jagan@openedev.com>
Reviewed-by: Jagan Teki <jagan@openedev.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Signed-off-by: Stefano Babic <sbabic@denx.de>

Merge branch 'master' of git://git.denx.de/u-boot-sunxi

ARM: sunxi: use imply instead of bare default y in Kconfig

Fix annoying config redefines in SoC/board level Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Ma

ARM: sunxi: use imply instead of bare default y in Kconfig

Fix annoying config redefines in SoC/board level Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...

ARM: sunxi: move board/sunxi/Kconfig to arch/arm/mach-sunxi/Kconfig

For the consistent location of SoC-level Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: M

ARM: sunxi: move board/sunxi/Kconfig to arch/arm/mach-sunxi/Kconfig

For the consistent location of SoC-level Kconfig.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

show more ...