Merge branch 'master' of git://git.denx.de/u-boot-rockchip

spl: add hierarchical defaults for SPL_LDSCRIPT

With SPL_LDSCRIPT moved to Kconfig (and this being a 'string' config
node), all the lingering definitions in header files will cause
warnings/errors d

spl: add hierarchical defaults for SPL_LDSCRIPT

With SPL_LDSCRIPT moved to Kconfig (and this being a 'string' config
node), all the lingering definitions in header files will cause
warnings/errors due to the redefinition of the configuration item.

As we don't want to pollute the defconfig files (and values should
usually be identical for entire architectures), the defaults are moved
into Kconfig. Kconfig will always pick the first default that
matches, so please keep these values at the end of each file (to allow
any board-specific Kconfig, which will be included earlier) to
override with an unconditional default setting.

Signed-off-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Reviewed-by: Simon Glass <sjg@chromium.org>

show more ...

Kconfig: Migrate BOARD_LATE_INIT to a select

This option should not really be user selectable. Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
condi

Kconfig: Migrate BOARD_LATE_INIT to a select

This option should not really be user selectable. Note that on PowerPC
we currently only need BOARD_LATE_INIT when CHAIN_OF_TRUST is enabled so be
conditional on that.

Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> (for UniPhier)

show more ...

davinci: omapl138_lcdk: configure ddr2

The SPL is unable to load u-boot because the DDR2 is not configured.
Configure the DDR2.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom

davinci: omapl138_lcdk: configure ddr2

The SPL is unable to load u-boot because the DDR2 is not configured.
Configure the DDR2.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

davinci: omapl138_lcdk: configure pll0

The SPL is not able to boot properly because the PLL0 is not
configured. Configure it.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Ri

davinci: omapl138_lcdk: configure pll0

The SPL is not able to boot properly because the PLL0 is not
configured. Configure it.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig

Clean config headers by moving CONFIG_SYS_DA850_DDR_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed

ARM: davinci: Move CONFIG_SYS_DA850_DDR_INIT to Kconfig

Clean config headers by moving CONFIG_SYS_DA850_DDR_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig

Clean config headers by moving CONFIG_SYS_DA850_PLL_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed

ARM: davinci: Move CONFIG_SYS_DA850_PLL_INIT to Kconfig

Clean config headers by moving CONFIG_SYS_DA850_PLL_INIT away to a
Kconfig file.

Signed-off-by: Fabien Parent <fparent@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

arm: Add support for LEGO MINDSTORMS EV3

This is based on the davinci da850evm. It can boot from either the
on-board 16MB flash or from a microSD card. It also reads board
information from an I2C EE

arm: Add support for LEGO MINDSTORMS EV3

This is based on the davinci da850evm. It can boot from either the
on-board 16MB flash or from a microSD card. It also reads board
information from an I2C EEPROM.

The EV3 itself initally boots from write-protected EEPROM, so no
u-boot SPL is needed.

Signed-off-by: David Lechner <david@lechnology.com>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Merge remote-tracking branch 'u-boot/master'

arm: Remove da830evm board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

arm: Remove enbw_cmc board

This board has not been converted to generic board by the deadline.
Remove it.

Signed-off-by: Simon Glass <sjg@chromium.org>

arm: Remove unmaintained davinci boards

These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, son

arm: Remove unmaintained davinci boards

These boards have not been converted to generic board by the deadline.
Remove dm355evm, dm355leopard, dm365evm, dm6467evm, dvevm, ea20, schmoogie,
sffsdr, sonata.

Signed-off-by: Simon Glass <sjg@chromium.org>

show more ...

ARM: davinci: remove support for cam_enc_4xx

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.m

ARM: davinci: remove support for cam_enc_4xx

This has not been converted to Generic Board, so should be removed.
(See doc/README.generic-board for details.)

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Heiko Schocher <hs@denx.de>
Acked-by: Marek Vasut <marex@denx.de>

show more ...

arch: Make board selection choices optional

By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top

arch: Make board selection choices optional

By making the board selections optional, every defconfig will include
the board selection when running savedefconfig so if a new board is
added to the top of the list of choices the former top's defconfig will
still be correct.

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Cc: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'u-boot/master' into 'u-boot-arm/master'

davinci: add support for omapl138-lcdk board

Signed-off-by: Peter Howard <phoward@gme.net.au>
[trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename]
Signed-off-by: Tom Rini <t

davinci: add support for omapl138-lcdk board

Signed-off-by: Peter Howard <phoward@gme.net.au>
[trini: Add config file, update for ..._ether_addr() -> ..._ethaddr() rename]
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

ARM: davinci: remove hawkboard support

This is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Syed Mohamm

ARM: davinci: remove hawkboard support

This is still a non-generic board.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Acked-by: Sughosh Ganu <urwithsughosh@gmail.com>
Cc: Syed Mohammed Khasim <sm.khasim@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>

show more ...

Merge remote-tracking branch 'u-boot/master' into 'u-boot-arm/master'

ARM: davinci: move SoC sources to mach-davinci

Move
arch/arm/cpu/arm926ejs/davinci/* -> arch/arm/mach-davinci/*

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Cc: Tom Rini <trini@ti.com>