ARM: Add Support for Marvell Pantheon Familiy SoCs

Pantheon Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref:
http://www.marvell.com/products/processors/com

ARM: Add Support for Marvell Pantheon Familiy SoCs

Pantheon Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref:
http://www.marvell.com/products/processors/communications/marvell_pantheon_910_920_pb.pdf

SoC versions Supported:
1) PANTHEON920 (TD)
2) PANTHEON910 (TTC)

Signed-off-by: Lei Wen <leiwen@marvell.com>

show more ...

mv: seperate kirkwood and armada from common setting

Since there are lots of difference between kirkwood and armada series,
it is better to seperate them but still keep the most common file
shared b

mv: seperate kirkwood and armada from common setting

Since there are lots of difference between kirkwood and armada series,
it is better to seperate them but still keep the most common file
shared by all marvell platform in the mv-common configure file.

This patch move the kirkwood only driver definitoin in mv-common to
the <soc_name>/config.h.

This patch is tested with compilation for armada100 and guruplug.

Signed-off-by: Lei Wen <leiwen@marvell.com>

show more ...

ARM: fix write*() I/O accessors

Commit 3c0659b "ARM: Avoid compiler optimization for readb, writeb
and friends." introduced I/O accessors with memory barriers.
Unfortunately the new write*() accesso

ARM: fix write*() I/O accessors

Commit 3c0659b "ARM: Avoid compiler optimization for readb, writeb
and friends." introduced I/O accessors with memory barriers.
Unfortunately the new write*() accessors introduced a bug:

The problem is that the argument "v" gets evaluated twice. This
breaks code like used here (from "drivers/net/dnet.c"):

for (i = 0; i < wrsz; i++)
writel(*bufp++, &dnet->regs->TX_DATA_FIFO);

Use auxiliary variables to avoid such problems.

Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Albert Aribaud <albert.aribaud@free.fr>
Cc: Alexander Holler <holler@ahsoftware.de>
Cc: Dirk Behme <dirk.behme@googlemail.com>

show more ...

arm: Tegra2: Add basic NVIDIA Tegra2 SoC support

Signed-off-by: Tom Warren <twarren@nvidia.com>

armv7: add support for S5PC210 SoC

S5PC210 is a 32-bit RISC and Cortex-A9 Dual Core based micro-processor.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.p

armv7: add support for S5PC210 SoC

S5PC210 is a 32-bit RISC and Cortex-A9 Dual Core based micro-processor.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

show more ...

S5P: serial: Use the inline function instead of static value

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>

ARM: Avoid compiler optimization for readb, writeb and friends.

gcc 4.5.1 seems to ignore (at least some) volatile definitions,
avoid that as done in the kernel.

Reading C99 6.7.3 8 and the comment

ARM: Avoid compiler optimization for readb, writeb and friends.

gcc 4.5.1 seems to ignore (at least some) volatile definitions,
avoid that as done in the kernel.

Reading C99 6.7.3 8 and the comment 114) there, I think it is a bug of that
gcc version to ignore the volatile type qualifier used e.g. in __arch_getl().
Anyway, using a definition as in the kernel headers avoids such optimizations when
gcc 4.5.1 is used.

Maybe the headers as used in the current linux-kernel should be used,
but to avoid large changes, I've just added a small change to the current headers.

Signed-off-by: Alexander Holler <holler@ahsoftware.de>
Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Signed-off-by: Wolfgang Denk <wd@denx.de>
Cc: Alessandro Rubini <rubini-list@gnudd.com>
Tested-by: Thomas Weber <weber@corscience.de>
Acked-by: Alexander Holler <holler@ahsoftware.de>
Tested-by: Alexander Holler <holler@ahsoftware.de>

show more ...

armv7: s5pc1xx: don't use function pointer for clock functions

Because of the bss area is cleared after relocation, we've lost pointers.
This patch fixed it.

Signed-off-by: Minkyu Kang <mk7.kang@sa

armv7: s5pc1xx: don't use function pointer for clock functions

Because of the bss area is cleared after relocation, we've lost pointers.
This patch fixed it.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

show more ...

DaVinci DM6467: Enhance board Support

Support for DM6467 was incomplete and the build failed
as well. Patches were sent to the list but have not been
added. This enhances the DM6467 support.
Some mo

DaVinci DM6467: Enhance board Support

Support for DM6467 was incomplete and the build failed
as well. Patches were sent to the list but have not been
added. This enhances the DM6467 support.
Some more patches will need to be sent to bring
it in line with what is available in internal TI
trees


Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

show more ...

ARM: Update mach types

This commit updates the mach-types for ARM


Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

DaVinci DM6467: Added ET1011C (LSI) PHY support

Added arch/arm/cpu/arm926ejs/davinci/et1011c.c for handling
ET1011C gigabit phy. which overrides get_link_speed function
from default implementation.

DaVinci DM6467: Added ET1011C (LSI) PHY support

Added arch/arm/cpu/arm926ejs/davinci/et1011c.c for handling
ET1011C gigabit phy. which overrides get_link_speed function
from default implementation. This enables output of 125 MHz
reference clock on SYS_CLK pin.

Signed-off-by: Prakash PM <prakash.pm@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

show more ...

Davinci MMCSD Support

Added support for MMC/SD cards for Davinci. This feature is enabled by
CONFIG_DAVINCI_MMC and is dependant on CONFIG_MMC and CONFIG_GENERIC_MMC
options. This is tested on DM35

Davinci MMCSD Support

Added support for MMC/SD cards for Davinci. This feature is enabled by
CONFIG_DAVINCI_MMC and is dependant on CONFIG_MMC and CONFIG_GENERIC_MMC
options. This is tested on DM355 and DM365 EVMs with both the available mmc
controllers.

Signed-off-by: Alagu Sankar <alagusankar@embwise.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

show more ...

SPI: mxc_spi: replace fixed offsets with structures

This patch cleans driver code replacing all accesses
to registers with fixed offsets with a corresponding
structure.

Signed-off-by: Stefano Babic

SPI: mxc_spi: replace fixed offsets with structures

This patch cleans driver code replacing all accesses
to registers with fixed offsets with a corresponding
structure.

Signed-off-by: Stefano Babic <sbabic@denx.de>

show more ...

Add support for MX35 processor

The patch adds basic support for the Freescale's i.MX35
(arm1136 based) processor.

The patch adds also a prototype for the initialization
of the FEC(ethernet controll

Add support for MX35 processor

The patch adds basic support for the Freescale's i.MX35
(arm1136 based) processor.

The patch adds also a prototype for the initialization
of the FEC(ethernet controller) to netdev.h to avoid
warnings.

Signed-off-by: Stefano Babic <sbabic@denx.de>

show more ...

MX5: Add initial support for MX53 processor

Add initial support for Freescale MX53 processor,

- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def fro

MX5: Add initial support for MX53 processor

Add initial support for Freescale MX53 processor,

- Add the iomux support and the pin definition,
- Add the regs definition, clean up some unused def from mx51,
- Add the low level init support, make use the freq input of setup_pll macro

Signed-off-by: Jason Liu <r64343@freescale.com>

show more ...

ftpmu010: support faraday ftpmu010 driver

Faraday's ftpmu010 is a power managemnet unit which support cpu
sleep and frequency scaling. It has been integrated into many SoC.

This patch also move ftp

ftpmu010: support faraday ftpmu010 driver

Faraday's ftpmu010 is a power managemnet unit which support cpu
sleep and frequency scaling. It has been integrated into many SoC.

This patch also move ftpmu010 to a proper place for later enhancement.

Signed-off-by: Macpaul Lin <macpaul@andestech.com>

show more ...

Merge branch 'next' of ../next

AT91RM9200: fix AT91_PMC_MCKR_MDIV_* defines for this CPU

Signed-off-by: Guido Classen <clagix@gmail.com>
Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>

add Multi Function Pin configuration support for ARMADA100

This patch adds the support MFP support for Marvell ARMADA100 SoCs

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

arm: Add Support for Marvell ARMADA 100 Familiy SoCs

ARMADA 100 Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref: http://www.marvell.com/products/processors

arm: Add Support for Marvell ARMADA 100 Familiy SoCs

ARMADA 100 Family processors are highly integrated SoCs
based on Sheeva_88SV331x-v5 PJ1 cpu core.
Ref: http://www.marvell.com/products/processors/applications/armada_100

SoC versions Supported:
1) ARMADA168/88AP168 (Aspen P)
2) ARMADA166/88AP166 (Aspen M)
3) ARMADA162/88AP162 (Aspen L)

Contributors:
Eric Miao <eric.y.miao@gmail.com>
Lei Wen <leiwen@marvell.com>
Mahavir Jain <mjain@marvell.com>

Signed-off-by: Mahavir Jain <mjain@marvell.com>
Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

show more ...

Merge branch 'master' of ../master into next

Merge branch 'master' of git://git.denx.de/u-boot-imx

ARM: make timer variables in gt_t available for all ARM platforms

All code that attemots to access variables in BSS before relocation
(for example directly or indirectly by board_init_f()) needs to

ARM: make timer variables in gt_t available for all ARM platforms

All code that attemots to access variables in BSS before relocation
(for example directly or indirectly by board_init_f()) needs to be
fixed. Especially timer.c needs to fix on most of the ARM platforms.

This patch makes timer related variables in gd_t available for
all ARM implementations.

Signed-off-by: Prafulla Wadaskar <prafulla@marvell.com>

Edited commit message.
Signed-off-by: Wolfgang Denk <wd@denx.de>

show more ...

arm920t/at91/timer: replace bss variables by gd

Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc
bss values in arm920t/at91/timer driver.
The usage of bss values in driver befor

arm920t/at91/timer: replace bss variables by gd

Reuse the gd->tbl value for timestamp and add gd->lastinc for lastinc
bss values in arm920t/at91/timer driver.
The usage of bss values in driver before initialisation of bss is
forbidden. In that special case some data in .rel.dyn gets corrupted by
the arm920t/at91/timer driver.

Signed-off-by: Andreas Bießmann <andreas.devel@googlemail.com>

show more ...

Davinci 8xx: Move common functions to share code

As more Davinci 8xx board can be added, move common code
to be shared between boards.

* rebased ontop of Sugosh's patches
* moving the HAWKBOARD_K

Davinci 8xx: Move common functions to share code

As more Davinci 8xx board can be added, move common code
to be shared between boards.

* rebased ontop of Sugosh's patches
* moving the HAWKBOARD_KICK{0,1}_UNLOCK defines to
arch/arm/include/asm/arch-davinci/davinci_misc.h from to
arch/arm/include/asm/arch-davinci/da8xx_common.h
* don't define dram functions in PRELOADER
* move sync_env_enetaddr into existing EMAC ifdef
* use misc.c in hawkboard nand_spl

Signed-off-by: Ben Gardiner <bengardiner@nanometrics.ca>
Signed-off-by: Stefano Babic <sbabic@denx.de>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>

show more ...