ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions

CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to
be taken into account additionally. CONFIG_ARMV7_PSCI is only set on
boa

ARM: Clean up CONFIG_ARMV7_NONSEC/VIRT/PSCI conditions

CONFIG_ARMV7_VIRT depends on CONFIG_ARMV7_NONSEC, thus doesn't need to
be taken into account additionally. CONFIG_ARMV7_PSCI is only set on
boards that support CONFIG_ARMV7_NONSEC, and it only works on those.

CC: Tang Yuantian <Yuantian.Tang@freescale.com>
CC: York Sun <yorksun@freescale.com>
CC: Steve Rae <srae@broadcom.com>
CC: Andre Przywara <andre.przywara@linaro.org>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Tested-by: Alison Wang <alison.wang@freescale.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra124: video: Add full link training for eDP

Add full link training as a fallback in case the fast link training
fails.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin

tegra124: video: Add full link training for eDP

Add full link training as a fallback in case the fast link training
fails.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: video: support eDP displays on Tegra124 devices

Connect up the clocks and the eDP driver to make these displays work with
Tegra124-based devices.

Signed-off-by: Simon Glass <sjg@chromium.org

tegra: video: support eDP displays on Tegra124 devices

Connect up the clocks and the eDP driver to make these displays work with
Tegra124-based devices.

Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: Move display controller header into common

Allow this to be used by other Tegra SoCs.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

tegra124: clock: Add display clocks and functions

Add functions to provide access to the display clocks on Tegra124 including
setting the clock rate for an EDP display.

Signed-off-by: Simon Glass <

tegra124: clock: Add display clocks and functions

Add functions to provide access to the display clocks on Tegra124 including
setting the clock rate for an EDP display.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: clock: Split the clock source code into a separate function

Create a function which sets the source clock for a peripheral, given
the number of mux bits to adjust. This can then be used more

tegra: clock: Split the clock source code into a separate function

Create a function which sets the source clock for a peripheral, given
the number of mux bits to adjust. This can then be used more generally.
For now, don't export it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: clock: Add checking for invalid clock IDs

The get_pll() function can do the wrong thing if passed values that are
out of range. Add checks for this and add a function which can return
a 'simp

tegra: clock: Add checking for invalid clock IDs

The get_pll() function can do the wrong thing if passed values that are
out of range. Add checks for this and add a function which can return
a 'simple' PLL. This can be defined by SoCs with their own clocks.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: Provide a function to allow LCD PMIC setup

Some LCDs require a PMIC to be set up - add a function for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@n

tegra: Provide a function to allow LCD PMIC setup

Some LCDs require a PMIC to be set up - add a function for this.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: Add a board ID function

Add a way of displaying a numeric board ID on start-up.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

tegra: pwm: Allow the clock rate to be left as is

When enabling a PWM, allow the existing clock rate and source to stand
unchanged.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom

tegra: pwm: Allow the clock rate to be left as is

When enabling a PWM, allow the existing clock rate and source to stand
unchanged.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

tegra: Move the pwm into tegra-common

This is needed for tegra124 also, so make it common and add a header file
for tegra124.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren

tegra: Move the pwm into tegra-common

This is needed for tegra124 also, so make it common and add a header file
for tegra124.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>

show more ...

stm32f4: add serial print port

Add the stm32F4 board's serial ports support.
User can use it easily.
The user only need to edit the number of the usart.
The patch also fix the serial print out.

Las

stm32f4: add serial print port

Add the stm32F4 board's serial ports support.
User can use it easily.
The user only need to edit the number of the usart.
The patch also fix the serial print out.

Last, this version of patch fix the first patch checkpatch.pl error.
Thanks to Kamil Lulko.

Signed-off-by: kunhuahuang <huangkunhua@gmail.com>

show more ...

ARM: socfpga: move SoC headers to mach-socfpga/include/mach

Move headers to mach-socfpga as well.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Merge git://git.denx.de/u-boot-marvell

arm: armada-xp: Move SoC headers to mach-mvebu/include/mach

Move arch/arm/include/asm/arch-armada-xp/*
-> arch/arm/mach-mvebu/include/mach/*

Additionally the SYS_SOC is renamed from "armada-xp

arm: armada-xp: Move SoC headers to mach-mvebu/include/mach

Move arch/arm/include/asm/arch-armada-xp/*
-> arch/arm/mach-mvebu/include/mach/*

Additionally the SYS_SOC is renamed from "armada-xp" to "mvebu". With this
change all these files can better be shared with other, newer Mavell
MVEBU SoC's. Like the upcoming Armada 38x support.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Tested-by: Kevin Smith <kevin.smith@elecsyscorp.com>
Tested-by: Dirk Eibach <dirk.eibach@gdsys.cc>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-arm

Merge branch 'u-boot/master' into 'u-boot-arm/master'

sunxi: usb: Do not call phy_probe from hcd code

The 2/3 usb-phys on the sunxi SoCs are really a single separate functional
block, and are modelled as such in devicetree. So once we've moved all the

sunxi: usb: Do not call phy_probe from hcd code

The 2/3 usb-phys on the sunxi SoCs are really a single separate functional
block, and are modelled as such in devicetree. So once we've moved all the
sunxi usb code to the driver-model then phy_probe will be called once
for the entire block from the driver-model enumeration code.

Move to this now as this also avoids problems with phy_probe being called
multiple times once we introduce ohci support. This also allows us to get rid
of the sunxi_usb_phy_enabled_count variable as phy_probe now is guaranteed
to be called only once.

Since we're effectively rewriting the probe / remove functions, move them
to the end of the file while we are at it, as that is the most logical place
for them.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: usb: Rename the usbc.? files to usb_phy.?

The usbc.? files now only contain usb-phy related code, rename them to make
this clear.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by:

sunxi: usb: Rename the usbc.? files to usb_phy.?

The usbc.? files now only contain usb-phy related code, rename them to make
this clear.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: usb: Rename sunxi_usbc_foo functions to sunxi_usb_phy_bar

Rename the sunxi_usbc_foo functions to sunxi_usb_phy_bar to make it clear
that these are usb-phy functions. Also change the verbs & n

sunxi: usb: Rename sunxi_usbc_foo functions to sunxi_usb_phy_bar

Rename the sunxi_usbc_foo functions to sunxi_usb_phy_bar to make it clear
that these are usb-phy functions. Also change the verbs & nouns in the suffix
to match the verbs & nouns used in the Linux kernels generic phy framework.

This patch purely renames things, it contains no functional changes.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: usb: Remove sunxi_usbc_get_io_base function

This is the only function left in sunxi/usbc.c which is not phy related,
so remove it.

This is a preparation patch for turning the usbc.c code int

sunxi: usb: Remove sunxi_usbc_get_io_base function

This is the only function left in sunxi/usbc.c which is not phy related,
so remove it.

This is a preparation patch for turning the usbc.c code into a proper
usb phy driver.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: axp: Remove non driver-model support from the axp gpio code

Now that all sunxi boards are using driver-model for gpio (*), we can remove
the non driver-model support from the axp gpio code, a

sunxi: axp: Remove non driver-model support from the axp gpio code

Now that all sunxi boards are using driver-model for gpio (*), we can remove
the non driver-model support from the axp gpio code, and the glue to call
into the axp gpio code from the sunxi_gpio non driver-model code.

*) For the regular u-boot build, SPL still uses non driver-model gpio for
now, but the SPL never uses axp gpios support and we were already not building
axp-gpio support for the SPL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: gmac: Move sunxi_gmac_initialize proto out of netdev.h

netdev.h should not be included in driver-model enabled builds (doing so
causes compiler warnings about struct eth_driver not being decl

sunxi: gmac: Move sunxi_gmac_initialize proto out of netdev.h

netdev.h should not be included in driver-model enabled builds (doing so
causes compiler warnings about struct eth_driver not being declared), but
we do use sunxi_gmac_initialize in the driver-model case, so move it out of
netdev.h .

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: axp: Add driver-model support to the axp_gpio code

Add driver-model support to the axp_gpio code, note that this needs a small
tweak to the driver-model version of sunxi_name_to_gpio to deal

sunxi: axp: Add driver-model support to the axp_gpio code

Add driver-model support to the axp_gpio code, note that this needs a small
tweak to the driver-model version of sunxi_name_to_gpio to deal with the
vbus detect and enable pins which are not standard numbered gpios.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...

sunxi: axp: Move axp gpio code to a separate axpi-gpio driver

Move the axp-gpio code out of the drivers/power/axp*.c code, and into
a new separate axpi-gpio driver.

This change drops supports for t

sunxi: axp: Move axp gpio code to a separate axpi-gpio driver

Move the axp-gpio code out of the drivers/power/axp*.c code, and into
a new separate axpi-gpio driver.

This change drops supports for the gpio3 pin on the axp209, as that requires
special handling, and no boards are using it.

Besides cleaning things up by moving the code to a separate driver, as
a bonus this change also adds support for the (non vusb) gpio pins on the
axp221 and the gpio pins on the axp152.

The new axp-gpio driver gets its own Kconfig option, and is only enabled
on boards which need it. Besides that it only gets enabled in the regular
u-boot build and not for the SPL as we never need it in the SPL.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ian Campbell <ijc@hellion.org.uk>

show more ...