Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes"

This reverts commit bd750e7a6c515c081b72d4ef108a2bfa691a3fd1

Implemented the new workaround for auto tuning based on
zynqmp co

Revert "ARM64: zynqmp: Added broken-tuning property to SD, eMMC nodes"

This reverts commit bd750e7a6c515c081b72d4ef108a2bfa691a3fd1

Implemented the new workaround for auto tuning based on
zynqmp compatible string, so removed the 'broken-tuning'
property.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: change sdhci compatible string.

This patch changes the compatible string for sdhci node,
adds "xlnx,device_id" and "xlnx,mio_bank" property to sdhci node.

Signed-off-by: Sai Krishna

ARM64: zynqmp: change sdhci compatible string.

This patch changes the compatible string for sdhci node,
adds "xlnx,device_id" and "xlnx,mio_bank" property to sdhci node.

Signed-off-by: Sai Krishna Potthuri <lakshmis@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: List all SMMU ids

Add SMMU description for all tested IPs.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Add support for zynqmp fpga manager

Add support for zynqmp fpga manager.

Signed-off-by: Nava kishore Manne <navam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Add cortexa53 edac node

This patch adds edac node for arm cortexa53 to report
errors on L1 and L2 caches.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: M

ARM64: zynqmp: Add cortexa53 edac node

This patch adds edac node for arm cortexa53 to report
errors on L1 and L2 caches.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

Revert "ARM64: zynqmp: Add serdes address space dp driver"

This reverts commit 786db82bd5bf09cc8f78c8b14445e843d7566b1c.

Since we are using serdes driver , no need of mapping serdes register
space

Revert "ARM64: zynqmp: Add serdes address space dp driver"

This reverts commit 786db82bd5bf09cc8f78c8b14445e843d7566b1c.

Since we are using serdes driver , no need of mapping serdes register
space into DP driver.

Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com>
Tested-by: Hyun Kwon <hyunk@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: drm: Add DMA index

Each plane can be associated with multiple DMA channels. So add
index for each DMA channel.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal S

ARM64: zynqmp: drm: Add DMA index

Each plane can be associated with multiple DMA channels. So add
index for each DMA channel.

Signed-off-by: Hyun Kwon <hyun.kwon@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: Sync gpio node properties

Keep dtsi in sync with mainline kernel.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Remove xlnx,id property

Remove unused xlnx,id property because it is not the part of
DT binding.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: pci: Updating device tree as per upstream

Updating required device tree changes as per mainlined driver
from 4.6 kernel.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Sign

ARM64: zynqmp: pci: Updating device tree as per upstream

Updating required device tree changes as per mainlined driver
from 4.6 kernel.

Signed-off-by: Bharat Kumar Gogada <bharatku@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: Support for multiple PM IDs assigned to a PM domain

Previously, it was assumed that there is a 1:1 mapping between
PM ID defined in the platform firmware and a PM domain. However, the

ARM64: zynqmp: Support for multiple PM IDs assigned to a PM domain

Previously, it was assumed that there is a 1:1 mapping between
PM ID defined in the platform firmware and a PM domain. However, there
can be a situation where multiple PM IDs belong to a single PM domain
(e.g. PM IDs for GPU and two pixel processors correspond to a single
PM domain).

This patch adds support for assigning more than one PM ID to
a single PM domain.

Updated documentation accordingly.

Assigned pixel processors PM IDs to GPU PM domain.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: DT: Add PM domains for GPU and PCIE

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <mich

ARM64: zynqmp: DT: Add PM domains for GPU and PCIE

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: DT: Remove unused PM domains for PLL

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.s

ARM64: zynqmp: DT: Remove unused PM domains for PLL

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: DT: Remove unused DDR PM domain

DDR power states are handled by the PM firmware, so this domain is
redundant. Also, since there is no device using this PM domain,
it will be powered o

ARM64: zynqmp: DT: Remove unused DDR PM domain

DDR power states are handled by the PM firmware, so this domain is
redundant. Also, since there is no device using this PM domain,
it will be powered off during boot, which is wrong.

Signed-off-by: Filip Drazic <filip.drazic@aggios.com>
Acked-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: Remove note about level shifter on zcu102

i2c device is just level shifter. Remove reference from dts.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Add dcc port to dtsi

Add dcc to dtsi for supporting system without serial port.
DCC is enabled by default on ZynqMP.
Adding dcc to zcu100 and zcu102 which were tested.

Signed-off-by:

ARM64: zynqmp: Add dcc port to dtsi

Add dcc to dtsi for supporting system without serial port.
DCC is enabled by default on ZynqMP.
Adding dcc to zcu100 and zcu102 which were tested.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: Add gpio-keys for zcu102

There is gpio push button on MIO22. Add it to DTS to have full board
description.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Enable gpio-led as heartbeat on zcu102

Show user that Linux is alive on the board.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Enable can1 for ep108

This patch enables can1 for ep108.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-o

ARM64: zynqmp: Enable can1 for ep108

This patch enables can1 for ep108.

Signed-off-by: Naga Sureshkumar Relli <nagasure@xilinx.com>
Reviewed-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: Added clocks to DT for ep108

Added clks for ep108 platform.

Signed-off-by: VNSL Durga <vnsldurg@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

ARM64: zynqmp: Add clocks for LPDDMA

Zynqmp DMA driver expects two clocks (main clock and apb clock)
LPDDMA clock cofiguration is missing for the same in the
zynqmp-clk.dtsi file.

This patch update

ARM64: zynqmp: Add clocks for LPDDMA

Zynqmp DMA driver expects two clocks (main clock and apb clock)
LPDDMA clock cofiguration is missing for the same in the
zynqmp-clk.dtsi file.

This patch updates for the same.

Reported-by: Sai Pavan Boddu <saipava@xilinx.com>
Signed-off-by: Kedareswara rao Appana <appanad@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM64: zynqmp: Remove DTC 1.4.2 warnings

DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg):

ARM64: zynqmp: Remove DTC 1.4.2 warnings

DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /amba_apu has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /amba has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /amba/usb@fe200000 has a unit name,
but no reg property
Warning (unit_address_vs_reg): Node /amba/usb@fe300000 has a unit name,
but no reg property
Warning (unit_address_vs_reg): Node
/amba/dma@fd4c0000/dma-video0channel@fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@fd4c0000/dma-video1channel@fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@fd4c0000/dma-video2channel@fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@fd4c0000/dma-graphicschannel@fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@fd4c0000/dma-audio0channel@fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node
/amba/dma@fd4c0000/dma-audio1channel@fd4c0000 has a unit name, but no
reg property
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name

This patch is fixing them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Remove DTC 1.4.2 warnings

DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node

ARM: zynq: Remove DTC 1.4.2 warnings

DTC 1.4.2 reports these warnings:
Warning (unit_address_vs_reg): Node /memory has a reg or ranges
property, but no unit name
Warning (unit_address_vs_reg): Node /pmu has a reg or ranges property,
but no unit name
Warning (unit_address_vs_reg): Node /fixedregulator@0 has a unit name,
but no reg property

This patch is fixing them.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards

The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM,
32MB QSPI NOR flash and 256MB NAND flash.

ARM: zynq: Add support for the topic-miami system-on-modules and carrier boards

The topic-miami SoMs contain a Zynq xc7z015 or xc7z030 SoC, 1GB DDR3L RAM,
32MB QSPI NOR flash and 256MB NAND flash.

The topic-miamiplus SoMs contain a Zynq xc7z035, xc7z045 or xc7z100 SoC,
2x 1GB DDR3L RAM, 64MB dual-parallel QSPI flash, clock sources
and a fan controller.

The "Florida" carrier boards add SD, USB, ethernet and other interfaces.

Signed-off-by: Mike Looijmans <mike.looijmans@topic.nl>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>

show more ...

ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node

Update the spi-max-frequency property of m25p80 flash slave to match
that of TI QSPI controller node, so that QSPI operations happen at

ARM: dts: dra7xx: Update spi-max-frequency for qspi slave node

Update the spi-max-frequency property of m25p80 flash slave to match
that of TI QSPI controller node, so that QSPI operations happen at
maximum supported frequency of 76.8MHz.

Signed-off-by: Vignesh R <vigneshr@ti.com>
Reviewed-by: Jagan Teki <jteki@openedev.com>

show more ...