Merge git://www.denx.de/git/u-boot-marvell

Conflicts:
arch/arm/Kconfig

Signed-off-by: Tom Rini <trini@konsulko.com>

arm: mvebu: Add runtime detection of UART (xmodem) boot-mode

This patch adds runtime detection of the Marvell UART boot-mode (xmodem
protocol). If this boot-mode is detected, SPL will return to the

arm: mvebu: Add runtime detection of UART (xmodem) boot-mode

This patch adds runtime detection of the Marvell UART boot-mode (xmodem
protocol). If this boot-mode is detected, SPL will return to the
BootROM to continue the UART booting.

With this patch its now possible, to generate a U-Boot image that
can be booted either from the strapped boot-device (e.g. SPI NOR, MMC,
etc) or via the xmodem protocol from the UART. In the UART case,
the kwboot tool will dynamically insert the UART boot-device type
into the image. And also patch the load address in the header, so
that the mkimage header will be skipped (as its not expected by the
Marvell BootROM).

This simplifies the development for Armada XP / 38x based boards.
As no special images need to be generated by selecting the
MVEBU_BOOTROM_UARTBOOT Kconfig option.

Since the Kconfig option MVEBU_BOOTROM_UARTBOOT is not needed any
more, its now completely removed.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Luka Perkov <luka.perkov@sartura.hr>
Cc: Dirk Eibach <dirk.eibach@gdsys.cc>
Cc: Phil Sutter <phil@nwl.cc>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>

show more ...

Prepare v2016.01

Signed-off-by: Tom Rini <trini@konsulko.com>

arm, Makefile: correct compilation flag for u-boot-dtb

The compilation of u-boot-dtb.img should be controlled by
CONFIG_OF_CONTROL and not CONFIG_DM.
CONFIG_DM may be defined even without Device Tre

arm, Makefile: correct compilation flag for u-boot-dtb

The compilation of u-boot-dtb.img should be controlled by
CONFIG_OF_CONTROL and not CONFIG_DM.
CONFIG_DM may be defined even without Device Tree requirement.

This was added in commit 947cee1127c5fa97529c8cda4f0b48d141f92560.

Signed-off-by: Ruchika Gupta <ruchika.gupta@freescale.com>
Signed-off-by: Aneesh Bansal <aneesh.bansal@freescale.com>
CC: Alison Wang <alison.wang@freescale.com>

show more ...

Prepare v2016.01-rc4

Signed-off-by: Tom Rini <trini@konsulko.com>

Prepare v2016.01-rc3

Signed-off-by: Tom Rini <trini@konsulko.com>

Prepare v2016.01-rc2

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'zynq' of git://www.denx.de/git/u-boot-microblaze

ARM: zynq: Add target for building bootable SPL image for Zynq

Add a build target to generate 'boot.bin' which includes SPL. This is
used by the platforms BootROM to load SPL directly.

This change

ARM: zynq: Add target for building bootable SPL image for Zynq

Add a build target to generate 'boot.bin' which includes SPL. This is
used by the platforms BootROM to load SPL directly.

This change also conditionally changes what the 'boot.bin' target
generates depending on the SoC. Leaving the behaviour unchanged for the
AT91 targets.

Signed-off-by: Nathan Rossi <nathan@nathanrossi.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Andreas Bießmann <andreas.devel@googlemail.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

show more ...

Prepare v2016.01-rc1

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge git://git.denx.de/u-boot

Merge branch 'master' of git://git.denx.de/u-boot-arm

Various Makefiles: Add SPDX-License-Identifier tags

After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours

Various Makefiles: Add SPDX-License-Identifier tags

After consulting with some of the SPDX team, the conclusion is that
Makefiles are worth adding SPDX-License-Identifier tags too, and most of
ours have one. This adds tags to ones that lack them and converts a few
that had full (or in one case, very partial) license blobs into the
equivalent tag.

Cc: Kate Stewart <kstewart@linuxfoundation.org>
Signed-off-by: Tom Rini <trini@konsulko.com>

show more ...

arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD

When building a Thumb-1-only target with CONFIG_SYS_THUMB_BUILD,
some files fail to build, most of the time because they include
mcr instructions, wh

arm: support Thumb-1 with CONFIG_SYS_THUMB_BUILD

When building a Thumb-1-only target with CONFIG_SYS_THUMB_BUILD,
some files fail to build, most of the time because they include
mcr instructions, which only exist for Thumb-2.

This patch introduces a Kconfig option CONFIG_THUMB2 and uses
it to select between Thumb-2 and ARM mode for the aforementioned
files.

Signed-off-by: Albert ARIBAUD <albert.u.boot@aribaud.net>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot-fsl-qoriq

arm: ls1021a: Add QSPI or IFC support in SD boot

As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in
SD boot now. For the customer's demand, QSPI needs to be supported in SD
boo

arm: ls1021a: Add QSPI or IFC support in SD boot

As QSPI and IFC are pin-multiplexed on LS1021A, only IFC is supported in
SD boot now. For the customer's demand, QSPI needs to be supported in SD
boot too.

This patch adds QSPI or IFC support in SD boot according to the
corresponding defconfig. For detail, ls1021atwr_sdcard_ifc_defconfig is
used to support IFC in SD boot and ls1021atwr_sdcard_qspi_defconfig is
used to support QSPI in SD boot.

Signed-off-by: Alison Wang <alison.wang@freescale.com>
Reviewed-by: York Sun <yorksun@freescale.com>

show more ...

Merge branch 'master' of git://git.denx.de/u-boot

Merge git://git.denx.de/u-boot-x86

Makefile: Generate U_BOOT_DMI_DATE for SMBIOS

Add U_BOOT_DMI_DATE (format mm/dd/yyyy) generation to be used by
SMBIOS tables, as required by SMBIOS spec 3.0 [1]. See chapter 7.1,
BIOS information st

Makefile: Generate U_BOOT_DMI_DATE for SMBIOS

Add U_BOOT_DMI_DATE (format mm/dd/yyyy) generation to be used by
SMBIOS tables, as required by SMBIOS spec 3.0 [1]. See chapter 7.1,
BIOS information structure offset 08h for details.

[1] http://www.dmtf.org/sites/default/files/standards/documents/DSP0134_3.0.0.pdf

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

show more ...

Merge git://git.denx.de/u-boot-marvell

arm: mvebu: Add DM (driver model) support

This patch adds driver model support for some Marvell MVEBU SoC's. Including
Armada XP and 38x. All 3 currently mainlined boards are converted. DM is now
se

arm: mvebu: Add DM (driver model) support

This patch adds driver model support for some Marvell MVEBU SoC's. Including
Armada XP and 38x. All 3 currently mainlined boards are converted. DM is now
selected automatically for MVEBU platforms.

With this DM support now available for MVEBU, hardcoding the base addresses
and other information is not necessary any more. Probing should be done
by using the values provided via the device tree now instead. For this
the driver also need to be converted to DM. Patches for some of the drivers
will follow.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Simon Glass <sjg@chromium.org>
Cc: Luka Perkov <luka.perkov@sartura.hr>

show more ...

arm: mvebu: Add option to use UART xmodem protocol via kwboot

This patch enables the use of the kwboot tool, to boot mainline U-Boot
on the Marvell Armada XP/38x SoC's. This is done by returning to

arm: mvebu: Add option to use UART xmodem protocol via kwboot

This patch enables the use of the kwboot tool, to boot mainline U-Boot
on the Marvell Armada XP/38x SoC's. This is done by returning to the
SoC's BootROM after SPL has initialized the SDRAM. We need to make sure
to not reconfigure the internal register space and MBARs. Otherwise
the BootROM will not be able to continue after SPL jumps back to it.

To use this feature, please don't forget to change the BOOT_FROM line
in your board specfic kwbimage.cfg file this way:

BOOT_FROM uart

Tested on these Marvell eval boards:
DB-MV784MP-GP - Armada XP
DB-88F6820-GP - Armada 38x

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Dirk Eibach <eibach@gdsys.de>
Cc: Kevin Smith <kevin.smith@elecsyscorp.com>
Cc: Luka Perkov <luka.perkov@sartura.hr>

show more ...

Prepare v2015.10

Signed-off-by: Tom Rini <trini@konsulko.com>

Merge branch 'master' of git://git.denx.de/u-boot

Merge remote-tracking branch 'u-boot/master'