| #
04cbc19f |
| 07-Jun-2010 |
Cyril Chemparathy <cyril@ti.com> |
TI: TNETV107X EVM initial support
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a
bunch on on-chip integrated peripherals. This patch adds support for the
TNETV107X EVM bo
TI: TNETV107X EVM initial support
TNETV107X is a Texas Instruments SoC based on an ARM1176 core, and with a
bunch on on-chip integrated peripherals. This patch adds support for the
TNETV107X EVM board.
Signed-off-by: Cyril Chemparathy <cyril@ti.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
show more ...
|
| #
b5d289fc |
| 20-Apr-2010 |
Asen Dimov <dimov@ronetix.at> |
add new board pm9g45
Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401
The board i
add new board pm9g45
Add the new board PM9G45 from Ronetix GmbH.
* AT91SAM9G45 MCU at 400Mhz.
* 128MB DDR2 SDRAM
* 256MB NAND
* 10/100 MBits Ethernet DP83848
* Serial number chip DS2401
The board is made as SODIMM200 module.
For more info www.ronatix.at or info@ronetix.at.
Signed-off-by: Asen Dimov <dimov@ronetix.at>
show more ...
|
| #
72b81d39 |
| 31-May-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
s5pc1xx: Add support for Samsung Goni board
This patch adds support for the Samsung Goni board (S5PC110 SoC)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin
s5pc1xx: Add support for Samsung Goni board
This patch adds support for the Samsung Goni board (S5PC110 SoC)
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
show more ...
|
| #
922d27b5 |
| 31-May-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
arch/arm/include/asm/mach-types.h
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
| #
bd7bb6f8 |
| 28-May-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'next' of git://git.denx.de/u-boot-nios
|
| #
1117cbf2 |
| 28-May-2010 |
Thomas Chou <thomas@wytron.com.tw> |
nios: remove nios-32 arch
The nios-32 arch is obsolete and broken. So it is removed.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
|
| #
9d62f20d |
| 10-May-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
arch/arm/include/asm/mach-types.h
common/serial.c
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
|
| #
900a1fe8 |
| 04-May-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
4185ae7a |
| 30-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of ssh://gemini/home/wd/git/u-boot/master
|
| #
0903b524 |
| 30-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-ppc4xx
|
| #
16b76705 |
| 18-Mar-2010 |
Siddarth Gore <[gores@marvell.com]> |
Marvell GuruPlug Board Support
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot
References:
http://www.globalscaletechnologies.com/t-guruplug
Marvell GuruPlug Board Support
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot
References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org
This patch is for GuruPlug Plus, but it supports Standard version
as well.
Signed-off-by: Siddarth Gore <gores@marvell.com>
show more ...
|
| #
bbe31092 |
| 05-Mar-2010 |
Heiko Schocher <hs@denx.de> |
arm, i.mx27: add support for magnesium board from projectiondesign
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND
arm, i.mx27: add support for magnesium board from projectiondesign
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h
Signed-off-by: Heiko Schocher <hs@denx.de>
show more ...
|
| #
029faf3e |
| 27-Apr-2010 |
Stefan Roese <sr@denx.de> |
ppc4xx: Add support for ICON board (PPC440SPe)
This patch adds support for the Mosaix Technologies, Inc. ICON board,
based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM
(512MB s
ppc4xx: Add support for ICON board (PPC440SPe)
This patch adds support for the Mosaix Technologies, Inc. ICON board,
based on the AppliedMicro (AMCC) PPC440SPe. It's equipped with an SODIMM
(512MB standard) and 64MByte of NOR FLASH.
Support for the onboard SM502 will be added later.
Signed-off-by: Stefan Roese <sr@denx.de>
show more ...
|
| #
8e98f5f7 |
| 27-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-mpc5xxx
|
| #
c88d6ab1 |
| 27-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'next' of git://git.denx.de/u-boot-nios
|
| #
8cbb0ddd |
| 21-Apr-2010 |
Thomas Chou <thomas@wytron.com.tw> |
nios2: add nios2-generic board
This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot
A fpga parameter fil
nios2: add nios2-generic board
This is a generic approach to port u-boot for nios2 boards.
You may find the usage of this approach on the nioswiki,
http://nioswiki.com/DasUBoot
A fpga parameter file, which contains base address information
and drivers declaration, is generated from Altera's hardware system
description sopc file using tools.
The example fpga parameter file is compatible with EP1C20, EP1S10
and EP1S40 boards. So these boards can be removed after this commit.
Though epcs controller is removed to cut the dependency of altera_spi
driver.
Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: Scott McNutt <smcnutt@psyent.com>
show more ...
|
| #
a3921eef |
| 24-Apr-2010 |
Anatolij Gustschin <agust@denx.de> |
mpc5121: add support for PDM360NG board
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.
Signed-off-by: Michael Weiss <michael.weiss@ifm.com>
Signed-off-by: Detlev Zundel <dzu@denx.de>
Sign
mpc5121: add support for PDM360NG board
PDM360NG is a MPC5121E based board by ifm ecomatic gmbh.
Signed-off-by: Michael Weiss <michael.weiss@ifm.com>
Signed-off-by: Detlev Zundel <dzu@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
show more ...
|
| #
6bb7c92c |
| 22-Apr-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
36338b86 |
| 18-Mar-2010 |
Siddarth Gore <[gores@marvell.com]> |
Marvell GuruPlug Board Support
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot
References:
http://www.globalscaletechnologies.com/t-guruplug
Marvell GuruPlug Board Support
GuruPlug Standard: 1 Gb Ethernet, 2 USB 2.0
GuruPlug Plus: 2 Gb Ethernet, 2 USB 2.0, 1 eSATA, 1 uSD slot
References:
http://www.globalscaletechnologies.com/t-guruplugdetails.aspx
http://plugcomputer.org
This patch is for GuruPlug Plus, but it supports Standard version
as well.
Signed-off-by: Siddarth Gore <gores@marvell.com>
show more ...
|
| #
83653121 |
| 19-Apr-2010 |
Minkyu Kang <mk7.kang@samsung.com> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
cpu/arm1176/cpu.c
cpu/arm1176/start.S
cpu/arm_cortexa8/s5pc1xx/Makefile
cpu/arm_cortexa8/s5pc1xx/clock.c
drivers/serial/serial_s
Merge branch 'master' of git://git.denx.de/u-boot-arm
Conflicts:
cpu/arm1176/cpu.c
cpu/arm1176/start.S
cpu/arm_cortexa8/s5pc1xx/Makefile
cpu/arm_cortexa8/s5pc1xx/clock.c
drivers/serial/serial_s5p.c
include/asm-arm/arch-s5pc1xx/clk.h
include/asm-arm/arch-s5pc1xx/gpio.h
include/asm-arm/arch-s5pc1xx/uart.h
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
show more ...
|
| #
e470955b |
| 05-Mar-2010 |
Heiko Schocher <hs@denx.de> |
arm, i.mx27: add support for magnesium board from projectiondesign
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND
arm, i.mx27: add support for magnesium board from projectiondesign
This patch adds support for the magnesium board from
projectiondesign. This board uses i.MX27 SoC and has
8MB NOR flash, 128MB NAND flash, FEC ethernet controller
integrated into i.MX27. As this port is based on
the imx27lite port, common config options are collected
in include/configs/imx27lite-common.h
Signed-off-by: Heiko Schocher <hs@denx.de>
show more ...
|
| #
fd4e49c1 |
| 10-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-blackfin
|
| #
1f2463d7 |
| 01-Apr-2010 |
Andre Schwarz <andre.schwarz@matrix-vision.de> |
Add initial support for Matrix Vision mvSMR board based on MPC5200B.
Signed-off-by: Andre Schwarz <andre.schwarz@matrix-vision.de>
|
| #
6a1f7e54 |
| 07-Apr-2010 |
Wolfgang Denk <wd@denx.de> |
Merge branch 'master' of git://git.denx.de/u-boot-arm
|
| #
3f1a5c16 |
| 24-Mar-2010 |
Brent Kandetzki <BrentK@teleco.com> |
Blackfin: IP04: new board port
A low cost 4 port IP-PBX board.
Signed-off-by: Brent Kandetzki <BrentK@teleco.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>
|