Merge changes Ic735cd1c,Iba4cdbf5,I0dd74152,I3a051ca2,Ie413233d, ... into integration

* changes:
feat(stm32mp2): add RIFSC/RISAB protection for USB3DR
feat(st-drivers): add RIFSC driver
feat(s

Merge changes Ic735cd1c,Iba4cdbf5,I0dd74152,I3a051ca2,Ie413233d, ... into integration

* changes:
feat(stm32mp2): add RIFSC/RISAB protection for USB3DR
feat(st-drivers): add RIFSC driver
feat(stm32mp2): add STM32MP_USB_PROGRAMMER support
feat(stm32mp2): generate FIP for DDR initialization
feat(stm32mp2): add support for minimal FIP with only DDR FW
fix(st): allow several call of stm32cubeprog_uart_load
feat(st): update stm32cubeprogrammer API
feat(stm32mp1): add stm32_get_uid_otp
feat(st-usb): add USB DWC3 driver
fix(st): replace down counter by a timeout upon dfu detach

show more ...

feat(stm32mp2): add RIFSC/RISAB protection for USB3DR

Add RIFSC/RISAB protection for USB3-IP:
- USB3DR Peripheral only accessible form Secure/Priv
- USB3DR Master is Secure/Priv to access SYSRAM in

feat(stm32mp2): add RIFSC/RISAB protection for USB3DR

Add RIFSC/RISAB protection for USB3-IP:
- USB3DR Peripheral only accessible form Secure/Priv
- USB3DR Master is Secure/Priv to access SYSRAM in bl2 plat setup.

Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Change-Id: Ic735cd1cadc5a3a52065b0c7db328268d405a77c

show more ...

Merge changes Ib220a866,I38e6af65,I1554efdb,Iae99985e,I96f96267, ... into integration

* changes:
feat(stm32mp25-fdts): enable rng nodes for ST boards
feat(stm32mp2): prepare DDR secure area encr

Merge changes Ib220a866,I38e6af65,I1554efdb,Iae99985e,I96f96267, ... into integration

* changes:
feat(stm32mp25-fdts): enable rng nodes for ST boards
feat(stm32mp2): prepare DDR secure area encryption
feat(stm32mp2): add some platform helpers
feat(st-drivers): add RISAF driver
feat(fdts): add RISAF nodes for STM32MP25
feat(stm32mp2-fdts): add memory firewall node
feat(stm32mp2-fdts): add firewall nodes in fw-config
feat(stm32mp2): add RIF dt-binding defines
feat(stm32mp1-fdts): add MCE support for STM32MP13 DK board
feat(stm32mp1): prepare DDR secure area encryption for STM32MP13
feat(stm32mp1): enable MCE driver for STM32MP13
feat(st-drivers): add Memory Cipher Engine driver
feat(dt-bindings): add MCE DT bindings for STM32MP13
fix(st-crypto): improve RNG health test configuration
feat(st): add RNG minor version
feat(st-crypto): add multi instance and error management in RNG driver
feat(stm32mp2): add HASH and RNG compilation
feat(stm32mp25-fdts): add RNG node

show more ...

feat(stm32mp2): prepare DDR secure area encryption

The RISAF4 defines the DDR secure areas with specific security setup
(encryption). Its master key needs to be written before any activation.
This i

feat(stm32mp2): prepare DDR secure area encryption

The RISAF4 defines the DDR secure areas with specific security setup
(encryption). Its master key needs to be written before any activation.
This is done only if SoC supports encryption.

Change-Id: I38e6af65cadf9678a75be1b861ee0c5beea5bcb9
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

show more ...

feat(st-drivers): add RISAF driver

Introduction of Resource Isolation Slave for Address space - Full
(RISAF) driver to configure main memory regions with access rights
defined in device node in DT(t

feat(st-drivers): add RISAF driver

Introduction of Resource Isolation Slave for Address space - Full
(RISAF) driver to configure main memory regions with access rights
defined in device node in DT(through FCONF compliance) or statically.

The driver is enabled as BL2 sources. Add driver-related platform
services.
RISAF base addresses and key size are set in platform definitions.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Loic Pallardy <loic.pallardy@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: Iae99985e8db7cb2b27f9ca25669e74c8e08792d2

show more ...

Merge changes I6422cd05,Idd01179d,I5c557616,I343a46d6,Id48671ae, ... into integration

* changes:
feat(st-clock): add STM32MP21 and STM32MP23 RCC variants
feat(stm32mp21): add RCC registers file

Merge changes I6422cd05,Idd01179d,I5c557616,I343a46d6,Id48671ae, ... into integration

* changes:
feat(st-clock): add STM32MP21 and STM32MP23 RCC variants
feat(stm32mp21): add RCC registers file
feat(stm32mp21): add clock and reset bindings
refactor(stm32mp2): update display of reset reason
feat(stm32mp25): add RCC register to display all IWDG flags
feat(stm32mp21): add PWR registers file
feat(st): introduce SoC family compilation switch
docs(changelog): add subsections for STM32MP2
docs(stm32mp2): introduce new STM32MP23 family
docs(stm32mp2): introduce new STM32MP21 family

show more ...

refactor(stm32mp2): update display of reset reason

Update the check of reset reason management, update displayed string
aligned with reference manual (por_rstn/bor_rstn/Pin reset), add some
missing

refactor(stm32mp2): update display of reset reason

Update the check of reset reason management, update displayed string
aligned with reference manual (por_rstn/bor_rstn/Pin reset), add some
missing reset reason (C1RST) and reuse string to reduce the size of BL2.

Change-Id: I343a46d69bf0447cafed684eab1b2e812e08ab3a
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

show more ...

feat(stm32mp21): add PWR registers file

Use the new file stm32mp21_pwr.h for STM32MP21 PWR peripheral registers
definition. Update platform code for backup domain write protection
disabling.

Change

feat(stm32mp21): add PWR registers file

Use the new file stm32mp21_pwr.h for STM32MP21 PWR peripheral registers
definition. Update platform code for backup domain write protection
disabling.

Change-Id: Iedfa764529bcd5119be8e94da7f7b84699e86086
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

show more ...

Merge "feat(stm32mp2): add FWU support" into integration

feat(stm32mp2): add FWU support

Add stm32_get_bkpr_fwu_info_addr() function.
Call stm32_fwu_set_boot_idx() in bl2_plat_handle_post_image_load().

Signed-off-by: Yann Gautier <yann.gautier@foss.st.co

feat(stm32mp2): add FWU support

Add stm32_get_bkpr_fwu_info_addr() function.
Call stm32_fwu_set_boot_idx() in bl2_plat_handle_post_image_load().

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Change-Id: Ieb57dffa4ce784d1ed61b401dc17376fe745c111

show more ...

Merge changes I8d62253e,I320a0585 into integration

* changes:
feat(stm32mp2): initialize gic and delay timer in bl31_plat_arch_setup
feat(stm32mp2): add BL31 device tree support

feat(stm32mp2): add BL31 device tree support

BL31 will need to access a device tree for several configurations (UART,
GIC, OTP mapping...).
Create a BL31 device tree (SOC_FW_CONFIG). It is loaded in

feat(stm32mp2): add BL31 device tree support

BL31 will need to access a device tree for several configurations (UART,
GIC, OTP mapping...).
Create a BL31 device tree (SOC_FW_CONFIG). It is loaded in DDR, in a
spare area.

Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I320a05859e1aa3dd8db9a274e7201075a8c250c2

show more ...

Merge changes Ic79429c3,Ie2d5272e,Iec73f9c5,Ie63f48dc,I951da75a, ... into integration

* changes:
feat(stm32mp2): load FW binaries to DDR
feat(stm32mp2-fdts): update STM32MP257F-EV1 DT
feat(fdt

Merge changes Ic79429c3,Ie2d5272e,Iec73f9c5,Ie63f48dc,I951da75a, ... into integration

* changes:
feat(stm32mp2): load FW binaries to DDR
feat(stm32mp2-fdts): update STM32MP257F-EV1 DT
feat(fdts): add DDR4 files for STM32MP2
feat(stm32mp25-fdts): add DDRCTRL and DDRPHY settings in DDR node
feat(stm32mp25-fdts): add DDR power supplies
feat(stm32mp2-fdts): add memory node
feat(stm32mp2): enable DDR driver

show more ...

feat(stm32mp2): load FW binaries to DDR

Now that DDR is initialized, we can load the different firmware
parts: BL32 (OP-TEE header), BL32 extra1 (OP-TEE), HW_CONFIG (U-Boot
device tree) and BL33 (U

feat(stm32mp2): load FW binaries to DDR

Now that DDR is initialized, we can load the different firmware
parts: BL32 (OP-TEE header), BL32 extra1 (OP-TEE), HW_CONFIG (U-Boot
device tree) and BL33 (U-Boot).

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Change-Id: Ic79429c3bd4516c339f91a10e0b3f2828bf6c392

show more ...

feat(stm32mp2): enable DDR driver

Call stm32mp2_ddr_probe() function in platform setup.
Move DDR systematic test file in common.mk.

Change-Id: I982abd33635a3222a52c967eac64676bc26b0d6b
Signed-off-b

feat(stm32mp2): enable DDR driver

Call stm32mp2_ddr_probe() function in platform setup.
Move DDR systematic test file in common.mk.

Change-Id: I982abd33635a3222a52c967eac64676bc26b0d6b
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>

show more ...

Merge changes I93de2db1,I880f88b1,I02e2fc75,I48908413,Ie7de9a9f, ... into integration

* changes:
feat(st-ddr): add STM32MP2 driver
refactor(st-ddr): create generic services
refactor(st-ddr): r

Merge changes I93de2db1,I880f88b1,I02e2fc75,I48908413,Ie7de9a9f, ... into integration

* changes:
feat(st-ddr): add STM32MP2 driver
refactor(st-ddr): create generic services
refactor(st-ddr): remove name from stm32mp_ddr_reg_desc
refactor(st-ddr): add definition for timeouts and delays
feat(st): add stm32mp_is_wakeup_from_standby()
feat(stm32mp2): add RETRAM map/unmap capability
feat(stm32mp2): add helper to get DDRDBG base address
feat(stm32mp2): handle DDR power supplies
feat(stm32mp1): handle DDR power supplies

show more ...

feat(stm32mp2): add RETRAM map/unmap capability

Add RETRAM base address and size definition at platform level.
RETRAM is used by the DDR driver to store retention registers (DDR
training results) in

feat(stm32mp2): add RETRAM map/unmap capability

Add RETRAM base address and size definition at platform level.
RETRAM is used by the DDR driver to store retention registers (DDR
training results) in order to restore them in standby exit sequence.
Add map/unmap services at platform level and configure dedicated RISAB5.

Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: I460b36fccce62e83c1fbff298f96b23530aaa4f3

show more ...

Merge changes I14df5d21,I7f952205,I6f52ec2c,Ibe0cacf8 into integration

* changes:
feat(stm32mp2-fdts): describe stpmic2 power supplies
feat(stm32mp2-fdts): add I2C7 pin muxing
feat(stm32mp2-fd

Merge changes I14df5d21,I7f952205,I6f52ec2c,Ibe0cacf8 into integration

* changes:
feat(stm32mp2-fdts): describe stpmic2 power supplies
feat(stm32mp2-fdts): add I2C7 pin muxing
feat(stm32mp2-fdts): add UART and I2C nodes for STM32MP2
feat(st-pmic): add STPMIC2 driver

show more ...

feat(st-pmic): add STPMIC2 driver

The STPMIC2 embeds 15 regulators with various
properties, and is designed to supply the STM32MP2
SOC. This driver handles a minimal set of feature
to handle the boo

feat(st-pmic): add STPMIC2 driver

The STPMIC2 embeds 15 regulators with various
properties, and is designed to supply the STM32MP2
SOC. This driver handles a minimal set of feature
to handle the boot of a board.

Signed-off-by: Pascal Paillet <p.paillet@st.com>
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: Ibe0cacf8aec2871eb9a86ec16cbbd18d3745fe9e

show more ...

Merge changes I09ab0a5c,I87d0a492,I613a52ae,I2fcd8d32,Ie91527a7, ... into integration

* changes:
feat(stm32mp2): manage DDR FW via FIP
feat(stm32mp2): introduce DDR type compilation flags
feat

Merge changes I09ab0a5c,I87d0a492,I613a52ae,I2fcd8d32,Ie91527a7, ... into integration

* changes:
feat(stm32mp2): manage DDR FW via FIP
feat(stm32mp2): introduce DDR type compilation flags
feat(stm32mp2): add RISAB registers description
feat(stm32mp2-fdts): add BL31 info in fw-config
feat(stm32mp2): add minimal support for BL31
feat(st): manage BL31 FCONF load_info struct

show more ...

feat(stm32mp2): manage DDR FW via FIP

This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.

DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the

feat(stm32mp2): manage DDR FW via FIP

This feature is enabled by default using STM32MP_DDR_FIP_IO_STORAGE.

DDR firmware binary is loaded from FIP to SRAM1 which needs to be
mapped.
Only half of the SRAM1 will be allocated to TF-A.
RISAB3 has to be configured to allow access to SRAM1.
Add image ID and update maximum number on platform side also.

Fill related descriptor information, add policy and update numbers.
DDR_TYPE variable is used to identify binary file, and image is now
added in the fiptool command line.

The DDR PHY firmware is not in TF-A repository. It can be found at
https://github.com/STMicroelectronics/stm32-ddr-phy-binary
To ease the selection of the firmware path, STM32MP_DDR_FW_PATH is added
to platform.mk file.

Change-Id: I09ab0a5c63406055a7b5ccd16d65e443de47ca2f
Signed-off-by: Nicolas Le Bayon <nicolas.le.bayon@st.com>
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>

show more ...

feat(stm32mp2): add minimal support for BL31

Add the required files to compile BL31 on STM32MP2.
Update BL2 configuration to load BL31. The platform boots until BL31,
but stops here as no other bina

feat(stm32mp2): add minimal support for BL31

Add the required files to compile BL31 on STM32MP2.
Update BL2 configuration to load BL31. The platform boots until BL31,
but stops here as no other binaries are loaded as DDR is not
initialized.
At runtime, BL31 will use only the first half of the SYSRAM, the upper
half will be used for non-secure DMA LLIs. To be sure nothing from this
area is still in the cache, invalidate the upper SYSRAM before enabling
BL31 cache. BL31 should then map only first half of the SYSRAM. But it
must temporarily map the upper half read-only, as this is where we will
retrieve BL2 parameters, used to fill registers for next boot stages.

Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Change-Id: Ie91527a7a26625624b4b3c65fb6a0ca9dd355dbd

show more ...

Merge "fix(stm32mp2): remove mapping of BL2 DT area" into integration

fix(stm32mp2): remove mapping of BL2 DT area

To prevent from coding issues that could overwrite DT area, we were
mapping this area as read-only on STM32MP1. But on STM32MP2, we need
this area to put

fix(stm32mp2): remove mapping of BL2 DT area

To prevent from coding issues that could overwrite DT area, we were
mapping this area as read-only on STM32MP1. But on STM32MP2, we need
this area to put BL31 binary. We were then using dynamic mapping. But
the area is included in the whole SYSRAM memory mapping. This is not
allowed with dynamic mapping. As no other code is running at this step,
and we know what code is running in BL2, just remove this extra
read-only protection for STM32MP2. A message is added after the post
load process of FW-CONFIG file, as BL2 DT area will be overwritten
after that.
And remove the now useless macros DTB_BASE & DTB_LIMIT.
This corrects Coverity issue: CID 443168.

Change-Id: Ic01d6a443ecf7721380ef39dc570e2d1627008d0
Signed-off-by: Yann Gautier <yann.gautier@foss.st.com>

show more ...

Merge changes from topic "stm32mp2_bl2_updates" into integration

* changes:
feat(stm32mp2): load fw-config file
feat(stm32mp2): add fw-config compilation
feat(stm32mp2-fdts): add fw-config fil

Merge changes from topic "stm32mp2_bl2_updates" into integration

* changes:
feat(stm32mp2): load fw-config file
feat(stm32mp2): add fw-config compilation
feat(stm32mp2-fdts): add fw-config files for STM32MP257F-EV1
feat(stm32mp2-fdts): add fw-config file
feat(stm32mp2-fdts): add clock tree for STM32MP257F-EV1
feat(stm32mp2): enable DDR sub-system clock
feat(stm32mp2): add fixed regulators support
feat(stm32mp2): print board info
feat(stm32mp2): display CPU info
feat(stm32mp2): get chip ID
feat(stm32mp2): add BL2 boot first steps
feat(stm32mp2): add defines for the PWR peripheral
feat(stm32mp2-fdts): add SD-card and eMMC support on STM32MP257F-EV1
feat(stm32mp2-fdts): add sdmmc pins definition
feat(stm32mp2-fdts): add sdmmc nodes in SoC DT file
feat(stm32mp2-fdts): add io_policies
feat(stm32mp2-fdts): remove pins-are-numbered

show more ...