refactor(msm8916): handle single core platforms

Some Qualcomm modem platforms (MDM*) are quite similar to MSM8916
except that there is just a single CPU core. This requires some special
handling:

refactor(msm8916): handle single core platforms

Some Qualcomm modem platforms (MDM*) are quite similar to MSM8916
except that there is just a single CPU core. This requires some special
handling:

- There is no GPU so the GPU SMMU also does not exist.
- Looking closely at dumps of the MMIO register regions reveals that
some of the register addresses are slightly different.

Add the necessary checks for this to allow building for those
platforms.

No functional change for existing platforms.

Change-Id: I0380ac3734876243e970a55d8bec5a8247175343
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

show more ...

refactor(msm8916): handle multiple CPU clusters

Some Qualcomm platforms similar to MSM8916 have multiple CPU clusters.
In this case, some of the hardware blocks are duplicated and must be
configured

refactor(msm8916): handle multiple CPU clusters

Some Qualcomm platforms similar to MSM8916 have multiple CPU clusters.
In this case, some of the hardware blocks are duplicated and must be
configured separately.

Refactor the code to handle additional clusters by introducing loops
and some conditionals.

No functional change for existing single cluster platforms.

Change-Id: I5b4b1ad2a1adde559d5b79b7698afe73733b2e90
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

show more ...

feat(msm8916): allow selecting which UART to use

At the moment the msm8916 platform port always uses UART number 2 for
debug output. In some situations it is necessary to change this, either
because

feat(msm8916): allow selecting which UART to use

At the moment the msm8916 platform port always uses UART number 2 for
debug output. In some situations it is necessary to change this, either
because only the other UART is exposed on the board or for runtime
debugging, to avoid conflicting with the normal world.

Make the UART to use configurable using QTI_UART_NUM on the make
command line and also add QTI_RUNTIME_UART as an option to keep using
the UART after early boot. The latter is disabled by default since it
requires reserving the UART and related clocks inside the normal world.

Change-Id: I14725f954bbcecebcf317e8601922a3d00f2ec28
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

show more ...

feat(msm8916): add SP_MIN port for AArch32

Use the new shared msm8916 setup code to allow compiling the minimal
AArch32 Secure Payload (SP_MIN) as simple PSCI implementation.

AArch64 is preferred f

feat(msm8916): add SP_MIN port for AArch32

Use the new shared msm8916 setup code to allow compiling the minimal
AArch32 Secure Payload (SP_MIN) as simple PSCI implementation.

AArch64 is preferred for the Cortex-A53 cores in MSM8916 but there are
some similar platforms with AArch32-only Cortex-A7 cores that can
benefit from this in future changes.

The AArch32 assembly implementation for msm8916_helpers.S and
uartdm_console.S is a direct port of the AArch64 implementation.
Only plat_get_my_entrypoint is slightly different because there is no
need to handle the "boot remapper" on cold boot for AArch32.

Change-Id: Idf160e86fb3e685fcedec3e051400e6273997b74
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>

show more ...