feat(imx8m): enable the csu init on imx8m

Enable the CSU init on i.MX8M SoC family. The 'csu_cfg' array
is just a placeholder for now as example with limited config listed.
In real use case,user can

feat(imx8m): enable the csu init on imx8m

Enable the CSU init on i.MX8M SoC family. The 'csu_cfg' array
is just a placeholder for now as example with limited config listed.
In real use case,user can add the CSU config as needed based on system design.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I1f7999efa346f18f6625ed8c478d088ed75f7833

show more ...

refactor(imx8m): replace magic number with enum type

Replace those RDC config related magic numbers with enum type

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6245ccfa74d079179dc0f20598

refactor(imx8m): replace magic number with enum type

Replace those RDC config related magic numbers with enum type

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6245ccfa74d079179dc0f205980c2daf5c7af786

show more ...

feat(imx8m): add imx csu/rdc enum type defines for imx8m

Add various enum type defines for CSU & RDC module for i.MX8M
family

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I70c050286919eab

feat(imx8m): add imx csu/rdc enum type defines for imx8m

Add various enum type defines for CSU & RDC module for i.MX8M
family

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I70c050286919eab51c6c553912bd4be57bc60f81

show more ...

feat(imx8m): enable conditional build for SDEI

SDEI support on imx8m is an optional feature, so
make it conditional build, not enabled by default.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change

feat(imx8m): enable conditional build for SDEI

SDEI support on imx8m is an optional feature, so
make it conditional build, not enabled by default.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: I6e7e8d77959ea352bc019f8468793992ec7ecfc4

show more ...

feat(plat/imx/imx8m/imx8mm): add support for measured boot

Add helper functions to generate event log for imx8mm
when MEASURED_BOOT=1.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Ch

feat(plat/imx/imx8m/imx8mm): add support for measured boot

Add helper functions to generate event log for imx8mm
when MEASURED_BOOT=1.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Ifc947d749055787fbda0b39170aa2eb8865b7802

show more ...

fix(plat/imx/imx8m/imx8mm): fix FTBFS on SPD=opteed

We need to add #include <arch.h> to platform_def.h to fix MODE_RW_64
undeclared.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Chan

fix(plat/imx/imx8m/imx8mm): fix FTBFS on SPD=opteed

We need to add #include <arch.h> to platform_def.h to fix MODE_RW_64
undeclared.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I358bc6644243a7ea1befd87f946b4087feddd857

show more ...

refactor(plat/imx/imx8m): make image load logic for TBBR FIP booting common

This commit makes the image load logic from imx8mm common for all
imx8m platform.

Signed-off-by: Ying-Chun Liu (PaulLiu)

refactor(plat/imx/imx8m): make image load logic for TBBR FIP booting common

This commit makes the image load logic from imx8mm common for all
imx8m platform.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: Ibfe2e9cc09d198cb9e309afaf381a0237a4b82ed

show more ...

refactor(plat/imx/imx): make imx io-storage logic for TBBR/FIP common

This commit makes imx image io-storage logic common for all
imx platform.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debia

refactor(plat/imx/imx): make imx io-storage logic for TBBR/FIP common

This commit makes imx image io-storage logic common for all
imx platform.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I15045ac8f9dfa8cb714e32f9e7475d5eae4e86e4

show more ...

feat(plat/imx/imx8m/imx8mm): enlarge BL33 (U-boot) size in FIP

When enabling U-boot with UEFI and secure boot, the size of U-boot
becomes more than 1MB. So we enlarge BL33 to 2MB.

Signed-off-by: Yi

feat(plat/imx/imx8m/imx8mm): enlarge BL33 (U-boot) size in FIP

When enabling U-boot with UEFI and secure boot, the size of U-boot
becomes more than 1MB. So we enlarge BL33 to 2MB.

Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I9d9d24132bb1ec17ef6080dc72e93c7f531c97b5

show more ...

feat(plat/imx8m): add system_reset2 implementation

Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm

feat(plat/imx8m): add system_reset2 implementation

Add imx_system_reset2 which extends existing SYSTEM_RESET. It provides
architectural reset definitions and vendor-specific resets.
By default warm reset is triggered.

Also refactor existing implementation of wdog reset, add details about
each flag used.

Change-Id: Ia7348c32c385f1c61f8085776e81dd1e38ddda5c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>

show more ...

feat(plat/imx8m): add SiP call for secondary boot

In iMX8MM it is possible to have two copies of bootloader in
SD/eMMC and switch between them. The switch is triggered either
by the BootROM in case

feat(plat/imx8m): add SiP call for secondary boot

In iMX8MM it is possible to have two copies of bootloader in
SD/eMMC and switch between them. The switch is triggered either
by the BootROM in case the bootloader image is faulty OR can be
enforced by the user. To trigger that switch the
PERSIST_SECONDARY_BOOT bit should be set in GPR10 SRC register.
As the bit is retained after WARM reset, that permits to control
BootROM behavior regarding what boot image it will boot after
reset: primary or secondary.

This is useful for reliable bootloader A/B updates, as it permits
switching between two copies of bootloader at different offsets of
the same storage.

If the PERSIST_SECONDARY_BOOT is 0, the boot ROM uses address
0x8400 for the primary image. If the PERSIST_SECONDARY_BOOT is 1,
the boot ROM reads that secondary image table from address 0x8200
on the boot media and uses the address specified in the table for
the secondary image.

Secondary Image Table contains the sector of secondary bootloader
image, exluding the offset to that image (explained below in the
note). To generate the Secondary Image Table, use e.g.:
$ printf '\x0\x0\x0\x0\x0\x0\x0\x0\x33\x22\x11'
'\x00\x00\x10\x0\x0\x00\x0\x0\x0'
> /tmp/sit.bin
$ hexdump -vC /tmp/sit.bin
00000000 00 00 00 00
00000004 00 00 00 00
00000008 33 22 11 00 <--- This is the "tag"
0000000c 00 10 00 00 <--- This is the "firstSectorNumber"
00000010 00 00 00 00

You can also use NXP script from [1][2] imx-mkimage tool for
SIT generation. Note that the firstSectorNumber is NOT the offset
of the IVT, but an offset of the IVT decremented by Image Vector
Table offset (Table 6-25. Image Vector Table Offset and Initial
Load Region Size for iMX8MM/MQ), so for secondary SPL copy at
offset 0x1042 sectors, firstSectorNumber must be 0x1000
(0x42 sectors * 512 = 0x8400 bytes offset).

In order to test redundant boot board should be closed and
SD/MMC manufacture mode disabled, as secondary boot is not
supported in the SD/MMC manufacture mode, which can be disabled
by blowing DISABLE_SDMMC_MFG (example for iMX8MM):
> fuse prog -y 2 1 0x00800000

For additional details check i.MX 8M Mini Apllication Processor
Reference Manual, 6.1.5.4.5 Redundant boot support for
expansion device chapter.

[1] https://source.codeaurora.org/external/imx/imx-mkimage/
[2] scripts/gen_sit.sh
Change-Id: I0a5cea7295a4197f6c89183d74b4011cada52d4c
Signed-off-by: Igor Opaniuk <igor.opaniuk@foundries.io>

show more ...

plat: imx8mm: Add in BL2 with FIP

Adds bl2 with FIP to the build required for mbed Linux booting where
we do:

BootROM -> SPL -> BL2 -> OPTEE -> u-boot

If NEED_BL2 is specified then BL2 will be bui

plat: imx8mm: Add in BL2 with FIP

Adds bl2 with FIP to the build required for mbed Linux booting where
we do:

BootROM -> SPL -> BL2 -> OPTEE -> u-boot

If NEED_BL2 is specified then BL2 will be built and BL31 will have
its address range modified upwards to accommodate. BL31 must be
loaded from a FIP in this case.

If NEED_BL2 is not specified then the current BL31 boot flow is
unaffected and u-boot SPL will load and execute BL31 directly.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I655343b3b689b1fc57cfbedda4d3dc2fbd549a96

show more ...

plat: imx8mm: Enable Trusted Boot

This patch enables Trusted Boot on the i.MX8MM with BL2 doing image
verification from a FIP prior to hand-over to BL31.

Signed-off-by: Bryan O'Donoghue <bryan.odon

plat: imx8mm: Enable Trusted Boot

This patch enables Trusted Boot on the i.MX8MM with BL2 doing image
verification from a FIP prior to hand-over to BL31.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I3c22783a5c49544d0bace8ef3724784b9b7cc64a

show more ...

plat: imx8mm: Add image load logic for TBBR FIP booting

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I0557ce6d0

plat: imx8mm: Add image load logic for TBBR FIP booting

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I0557ce6d0aa5ab321cac1ee25280b96762024396

show more ...

plat: imx8mm: Add initial defintions to facilitate FIP layout

Adds a number of definitions consistent with the established WaRP7
equivalents specifying number of io_handles and block devices.

Signe

plat: imx8mm: Add initial defintions to facilitate FIP layout

Adds a number of definitions consistent with the established WaRP7
equivalents specifying number of io_handles and block devices.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: If1d7ef1ad3ac3dfc860f949392c7534ce8d206e3

show more ...

plat: imx8mm: Add image io-storage logic for TBBR FIP booting

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I983

plat: imx8mm: Add image io-storage logic for TBBR FIP booting

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I9833a54d0938d70886ac88b1922b17edf1dee8e0

show more ...

plat: imx8mm: Add imx8mm_private.h to the build

Allows for exporting of FIP related methods cleanly in a private header.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by:

plat: imx8mm: Add imx8mm_private.h to the build

Allows for exporting of FIP related methods cleanly in a private header.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paulliu@debian.org>
Change-Id: I8523f1370312ed22ff7ca710cd916be52f725e3c

show more ...

plat: imx8m: Correct the imr mask reg offset

The number of gpc imr mask reg & the offset is different
on some SOC, so correct it & replace the magic number with
macro define.

Signed-off-by: Jacky B

plat: imx8m: Correct the imr mask reg offset

The number of gpc imr mask reg & the offset is different
on some SOC, so correct it & replace the magic number with
macro define.

Signed-off-by: Jacky Bai <ping.bai@nxp.com>
Change-Id: Ic701675cdd92e043dcd7f06722f2e871068aec74

show more ...

plat: imx: add sdei support for i.MX8MM

Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.

S

plat: imx: add sdei support for i.MX8MM

Add sdei support for i.MX8MM, this is to let jailhouse Hypervisor
could use SDEI to do hypervisor management, after physical IRQ
has been disabled routing.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Change-Id: I5fd697fee22df151e13d0f1335e8ac8a7bae6189

show more ...