plat: imx8mq: Implement IMX_SIP_GET_SOC_INFO

The manual documents that 0x3036006c should contains the soc revision
for imx8mq but this always reports A0. Work around this by parsing the
ROM header a

plat: imx8mq: Implement IMX_SIP_GET_SOC_INFO

The manual documents that 0x3036006c should contains the soc revision
for imx8mq but this always reports A0. Work around this by parsing the
ROM header and checking if OCOTP register 0x40 is stuck at 0xff0055aa.

Determining this inside TF-A makes life easier for OS, see for example
this linux discussion: https://lkml.org/lkml/2019/5/3/465

The soc revision can also be useful inside TF-A itself, for example for
the non-upstream DDR DVFS "busfreq" feature is affected by 8mq erratas.

The clock for OCOTP block can be disabled by OS so only initialize soc
revision once at boot time.

Change-Id: I9ca3f27840229ce8a28b53870e44da29f63c73aa
Signed-off-by: Leonard Crestez <leonard.crestez@nxp.com>

show more ...

Merge pull request #1766 from Anson-Huang/master

Add more SIP runtime service for i.MX8

imx: add i.MX8 SoCs build info SIP(silicon provider) service support

This patch adds NXP i.MX8 SoCs' build info SIP support for easy debug.
With this function enabled, TF-A's commit hash can be show

imx: add i.MX8 SoCs build info SIP(silicon provider) service support

This patch adds NXP i.MX8 SoCs' build info SIP support for easy debug.
With this function enabled, TF-A's commit hash can be showed in u-boot
debug console when booting up, when there is any issue which could be
related to TF-A, users can use the commit hash value to easily identify
which commit introduces the issue.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add i.MX8 SoCs thermal alarm SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, thermal sensors
are maintained by SCFW, Linux needs to call SMC to trap to

imx: add i.MX8 SoCs thermal alarm SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, thermal sensors
are maintained by SCFW, Linux needs to call SMC to trap to TF-A for
thermal alarm operation etc. by calling SCFW API.

This patch adds temperature alarm SIP service support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add i.MX8 SoCs OTP SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, OTP is
maintained by SCFW, Linux needs to call SMC to trap to TF-A
for OTP read/writ

imx: add i.MX8 SoCs OTP SIP(silicon provider) service support

For NXP's i.MX8 SoCs with system controller inside, OTP is
maintained by SCFW, Linux needs to call SMC to trap to TF-A
for OTP read/write etc. operations by calling SCFW API.

This patch adds OTP SIP service support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add wakeup source SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the wakeup
source is managed in SCFW(system controller firmware), if the
wakeup source is belonge

imx: add wakeup source SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the wakeup
source is managed in SCFW(system controller firmware), if the
wakeup source is belonged to system controller partition, then
before Linux suspend, the wakeup source should be set to
SC_PM_WAKE_SRC_SCU, and if the wakeup source is belonged to
Cortex-A partition, the wakeup source should be set to
SC_PM_WAKE_SRC_IRQSTEER, so need to add wakeup source SIP runtime
service to get Linux kernel's wakeup source and set the correct
wakeup source for system controller.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

Merge pull request #1754 from Anson-Huang/master

Add i.MX8 SoC SRTC/cpu-freq SIP runtime service support

imx: add cpu-freq SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the CPU's clock
rate is managed by SCFW(system controller firmware) and can ONLY be
changed from secur

imx: add cpu-freq SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the CPU's clock
rate is managed by SCFW(system controller firmware) and can ONLY be
changed from secure world, so SIP runtime service is needed for
setting CPU's clock rate, this patch adds cpu-freq SIP runtime service
support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...

imx: add imx8qm/imx8qx SRTC SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC

imx: add imx8qm/imx8qx SRTC SIP runtime service support

On i.MX8QM/i.MX8QX with system controller inside, the SRTC is
managed by SCFW(system controller firmware) and some functions
like setting SRTC's time etc. can ONLY be requested from secure
world, so SIP runtime service is needed for such kind of operations,
this patch adds SRTC SIP runtime service support for i.MX8QM and
i.MX8QX.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>

show more ...