Provide a hint to power controller for DSU cluster power down

By writing 0 to CLUSTERPWRDN DSU register bit 0, we send an
advisory to the power controller that cluster power is not required
when all

Provide a hint to power controller for DSU cluster power down

By writing 0 to CLUSTERPWRDN DSU register bit 0, we send an
advisory to the power controller that cluster power is not required
when all cores are powered down.

The AArch32 CLUSTERPWRDN register is architecturally mapped to the
AArch64 CLUSTERPWRDN_EL1 register

Change-Id: Ie6e67c1c7d811fa25c51e2e405ca7f59bd20c81b
Signed-off-by: Madhukar Pappireddy <madhukar.pappireddy@arm.com>

show more ...

Merge "Fix MISRA C issues in BL1/BL2/BL31" into integration

Fix MISRA C issues in BL1/BL2/BL31

Attempts to address MISRA compliance issues in BL1, BL2, and BL31 code.
Mainly issues like not using boolean expressions in conditionals,
conflicting variable name

Fix MISRA C issues in BL1/BL2/BL31

Attempts to address MISRA compliance issues in BL1, BL2, and BL31 code.
Mainly issues like not using boolean expressions in conditionals,
conflicting variable names, ignoring return values without (void), adding
explicit casts, etc.

Change-Id: If1fa18ab621b9c374db73fa6eaa6f6e5e55c146a
Signed-off-by: John Powell <john.powell@arm.com>

show more ...

Merge "Fix crash dump for lower EL" into integration

Fix crash dump for lower EL

This patch provides a fix for incorrect crash dump data for
lower EL when TF-A is built with HANDLE_EA_EL3_FIRST=1 option
which enables routing of External Aborts and SEr

Fix crash dump for lower EL

This patch provides a fix for incorrect crash dump data for
lower EL when TF-A is built with HANDLE_EA_EL3_FIRST=1 option
which enables routing of External Aborts and SErrors to EL3.

Change-Id: I9d5e6775e6aad21db5b78362da6c3a3d897df977
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge changes from topic "spmd-sel2" into integration

* changes:
SPMD: add command line parameter to run SPM at S-EL2 or S-EL1
SPMD: smc handler qualify secure origin using booleans
SPMD: SPMC

Merge changes from topic "spmd-sel2" into integration

* changes:
SPMD: add command line parameter to run SPM at S-EL2 or S-EL1
SPMD: smc handler qualify secure origin using booleans
SPMD: SPMC init, SMC handler cosmetic changes
SPMD: [tegra] rename el1_sys_regs structure to sys_regs
SPMD: Adds partially supported EL2 registers.
SPMD: save/restore EL2 system registers.

show more ...

SPMD: Adds partially supported EL2 registers.

This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.

Note: Following registe

SPMD: Adds partially supported EL2 registers.

This patch adds EL2 registers that are supported up to ARMv8.6.
ARM_ARCH_MINOR has to specified to enable save/restore routine.

Note: Following registers are still not covered in save/restore.
* AMEVCNTVOFF0<n>_EL2
* AMEVCNTVOFF1<n>_EL2
* ICH_AP0R<n>_EL2
* ICH_AP1R<n>_EL2
* ICH_LR<n>_EL2

Change-Id: I4813f3243e56e21cb297b31ef549a4b38d4876e1
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

show more ...

SPMD: save/restore EL2 system registers.

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283a

SPMD: save/restore EL2 system registers.

NOTE: Not all EL-2 system registers are saved/restored.
This subset includes registers recognized by ARMv8.0

Change-Id: I9993c7d78d8f5f8e72d1c6c8d6fd871283aa3ce0
Signed-off-by: Jose Marinho <jose.marinho@arm.com>
Signed-off-by: Olivier Deprez <olivier.deprez@arm.com>
Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Signed-off-by: Max Shvetsov <maksims.svecovs@arm.com>

show more ...

Merge changes from topic "tegra-downstream-02092020" into integration

* changes:
Tegra: spe: uninit console on a timeout
Tegra: handler to check support for System Suspend
Tegra: bpmp_ipc: imp

Merge changes from topic "tegra-downstream-02092020" into integration

* changes:
Tegra: spe: uninit console on a timeout
Tegra: handler to check support for System Suspend
Tegra: bpmp_ipc: improve cyclomatic complexity
Tegra: platform handler to relocate BL32 image
Tegra: common: improve cyclomatic complexity
Tegra210: secure PMC hardware block
Tegra: delay_timer: support for physical secure timer
include: move MHZ_TICKS_PER_SEC to utils_def.h
Tegra194: memctrl: lock mc stream id security config
Tegra210: resume PMC hardware block for all platforms
Tegra: macro for legacy WDT FIQ handling
Tegra186: enable higher performance non-cacheable load forwarding
Tegra210: enable higher performance non-cacheable load forwarding
cpus: higher performance non-cacheable load forwarding

show more ...

Tegra: delay_timer: support for physical secure timer

This patch modifies the delay timer driver to switch to the ARM
secure physical timer instead of using Tegra's on-chip uS timer.

The secure tim

Tegra: delay_timer: support for physical secure timer

This patch modifies the delay timer driver to switch to the ARM
secure physical timer instead of using Tegra's on-chip uS timer.

The secure timer is not accessible to the NS world and so eliminates
an important attack vector, where the Tegra timer source gets switched
off from the NS world leading to a DoS attack for the trusted world.

This timer is shared with the S-EL1 layer for now, but later patches
will mark it as exclusive to the EL3 exception mode.

Change-Id: I2c00f8cb4c48b25578971c626c314603906ad7cc
Signed-off-by: Varun Wadekar <vwadekar@nvidia.com>

show more ...

Merge changes from topic "aa/sel2_support" into integration

* changes:
S-EL2 Support: Check for AArch64
Add support for enabling S-EL2

S-EL2 Support: Check for AArch64

Check that entry point information requesting S-EL2
has AArch64 as an execution state during context setup.

Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.

S-EL2 Support: Check for AArch64

Check that entry point information requesting S-EL2
has AArch64 as an execution state during context setup.

Signed-off-by: Artsem Artsemenka <artsem.artsemenka@arm.com>
Change-Id: I447263692fed6e55c1b076913e6eb73b1ea735b7

show more ...

Add support for enabling S-EL2

This patch adds support for enabling S-EL2 if this EL is specified in the entry
point information being used to initialise a secure context. It is the caller's
respons

Add support for enabling S-EL2

This patch adds support for enabling S-EL2 if this EL is specified in the entry
point information being used to initialise a secure context. It is the caller's
responsibility to check if S-EL2 is available on the system before requesting
this EL through the entry point information.

Signed-off-by: Achin Gupta <achin.gupta@arm.com>
Change-Id: I2752964f078ab528b2e80de71c7d2f35e60569e1

show more ...

Merge changes from topic "jc/mte_enable" into integration

* changes:
Add documentation for CTX_INCLUDE_MTE_REGS
Enable MTE support in both secure and non-secure worlds

Merge "Add UBSAN support and handlers" into integration

Add UBSAN support and handlers

This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately cra

Add UBSAN support and handlers

This patch adds support for the Undefined Behaviour sanitizer. There are
two types of support offered - minimalistic trapping support which
essentially immediately crashes on undefined behaviour and full support
with full debug messages.

The full support relies on ubsan.c which has been adapted from code used
by OPTEE.

Change-Id: I417c810f4fc43dcb56db6a6a555bfd0b38440727
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

show more ...

Enable MTE support in both secure and non-secure worlds

This patch adds support for the new Memory Tagging Extension arriving in
ARMv8.5. MTE support is now enabled by default on systems that suppor

Enable MTE support in both secure and non-secure worlds

This patch adds support for the new Memory Tagging Extension arriving in
ARMv8.5. MTE support is now enabled by default on systems that support
at EL0. To enable it at ELx for both the non-secure and the secure
world, the compiler flag CTX_INCLUDE_MTE_REGS includes register saving
and restoring when necessary in order to prevent register leakage
between the worlds.

Change-Id: I2d4ea993d6b11654ea0d4757d00ca20d23acf36c
Signed-off-by: Justin Chadwell <justin.chadwell@arm.com>

show more ...

Merge "AArch64: Disable Secure Cycle Counter" into integration

AArch64: Disable Secure Cycle Counter

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled

AArch64: Disable Secure Cycle Counter

This patch fixes an issue when secure world timing information
can be leaked because Secure Cycle Counter is not disabled.
For ARMv8.5 the counter gets disabled by setting MDCR_El3.SCCD
bit on CPU cold/warm boot.
For the earlier architectures PMCR_EL0 register is saved/restored
on secure world entry/exit from/to Non-secure state, and cycle
counting gets disabled by setting PMCR_EL0.DP bit.
'include\aarch64\arch.h' header file was tided up and new
ARMv8.5-PMU related definitions were added.

Change-Id: I6f56db6bc77504634a352388990ad925a69ebbfa
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge "FVP_Base_AEMv8A platform: Fix cache maintenance operations" into integration

FVP_Base_AEMv8A platform: Fix cache maintenance operations

This patch fixes FVP_Base_AEMv8A model hang issue with
ARMv8.4+ with cache modelling enabled configuration.
Incorrect L1 cache flush operat

FVP_Base_AEMv8A platform: Fix cache maintenance operations

This patch fixes FVP_Base_AEMv8A model hang issue with
ARMv8.4+ with cache modelling enabled configuration.
Incorrect L1 cache flush operation to PoU, using CLIDR_EL1
LoUIS field, which is required by the architecture to be
zero for ARMv8.4-A with ARMv8.4-S2FWB feature is replaced
with L1 to L2 and L2 to L3 (if L3 is present) cache flushes.
FVP_Base_AEMv8A model can be configured with L3 enabled by
setting `cluster0.l3cache-size` and `cluster1.l3cache-size`
to non-zero values, and presence of L3 is checked in
`aem_generic_core_pwr_dwn` function by reading
CLIDR_EL1.Ctype3 field value.

Change-Id: If3de3d4eb5ed409e5b4ccdbc2fe6d5a01894a9af
Signed-off-by: Alexei Fedorov <Alexei.Fedorov@arm.com>

show more ...

Merge changes from topic "jts/spsr" into integration

* changes:
Refactor SPSR initialisation code
SSBS: init SPSR register with default SSBS value

SSBS: init SPSR register with default SSBS value

This patch introduces an additional precautionary step to further
enhance protection against variant 4. During the context initialisation
before we e

SSBS: init SPSR register with default SSBS value

This patch introduces an additional precautionary step to further
enhance protection against variant 4. During the context initialisation
before we enter the various BL stages, the SPSR.SSBS bit is explicitly
set to zero. As such, speculative loads/stores are by default disabled
for all BL stages when they start executing. Subsequently, each BL
stage, can choose to enable speculative loads/stores or keep them
disabled.

This change doesn't affect the initial execution context of BL33 which
is totally platform dependent and, thus, it is intentionally left up to
each platform to initialise.

For Arm platforms, SPSR.SSBS is set to zero for BL33 too. This means
that, for Arm platforms, all BL stages start with speculative
loads/stores disabled.

Change-Id: Ie47d39c391d3f20fc2852fc59dbd336f8cacdd6c
Signed-off-by: John Tsichritzis <john.tsichritzis@arm.com>

show more ...

Merge "Enable MTE support unilaterally for Normal World" into integration

Enable MTE support unilaterally for Normal World

This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.

Change-Id: I9ef64460beaba15e9a9c20a

Enable MTE support unilaterally for Normal World

This patch enables MTE for Normal world if the CPU suppors it. Enabling
MTE for secure world will be done later.

Change-Id: I9ef64460beaba15e9a9c20ab02da4fb2208b6f7d
Signed-off-by: Soby Mathew <soby.mathew@arm.com>

show more ...