Merge changes from topic "ck/tf-a/verbosity-cleanup" into integration

* changes:
build: unify verbosity handling
build: add facilities for interpreting boolean values
build: add string casing

Merge changes from topic "ck/tf-a/verbosity-cleanup" into integration

* changes:
build: unify verbosity handling
build: add facilities for interpreting boolean values
build: add string casing facilities to utilities

show more ...

build: unify verbosity handling

This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.

The `silent` and `verbose` variables

build: unify verbosity handling

This change introduces a few helper variables for dealing with verbose
and silent build modes: `silent`, `verbose`, `q` and `s`.

The `silent` and `verbose` variables are boolean values determining
whether the build system has been configured to run silently or
verbosely respectively (i.e. with `--silent` or `V=1`).

These two modes cannot be used together - if `silent` is truthy then
`verbose` is always falsy. As such:

make --silent V=1

... results in a silent build.

In addition to these boolean variables, we also introduce two new
variables - `s` and `q` - for use in rule recipes to conditionally
suppress the output of commands.

When building silently, `s` expands to a value which disables the
command that follows, and `q` expands to a value which supppresses
echoing of the command:

$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed but not echoed'

When building verbosely, `s` expands to a value which disables the
command that follows, and `q` expands to nothing:

$(s)echo 'This command is neither echoed nor executed'
$(q)echo 'This command is executed and echoed'

In all other cases, both `s` and `q` expand to a value which suppresses
echoing of the command that follows:

$(s)echo 'This command is executed but not echoed'
$(q)echo 'This command is executed but not echoed'

The `s` variable is predominantly useful for `echo` commands, where you
always want to suppress echoing of the command itself, whilst `q` is
more useful for all other commands.

Change-Id: I8d8ff6ed714d3cb401946c52955887ed7dca602b
Signed-off-by: Chris Kay <chris.kay@arm.com>

show more ...

Merge "refactor: moved drivers hdr files to include/drivers/nxp" into integration

refactor: moved drivers hdr files to include/drivers/nxp

NXP drivers header files are moved:
- from: drivers/nxp/<xx>/*.h
- to : include/drivers/nxp/<xx>/*.h

To accommodate these changes eac

refactor: moved drivers hdr files to include/drivers/nxp

NXP drivers header files are moved:
- from: drivers/nxp/<xx>/*.h
- to : include/drivers/nxp/<xx>/*.h

To accommodate these changes each drivers makefiles
drivers/nxp/<xx>/xx.mk, are updated.

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I3979c509724d87e3d631a03dbafda1ee5ef07d21

show more ...

Merge changes I500ddbe9,I9c10dac9,I53bfff85,I06f7594d,I24bff8d4, ... into integration

* changes:
nxp lx2160a-aqds: new plat based on soc lx2160a
NXP lx2160a-rdb: new plat based on SoC lx2160a

Merge changes I500ddbe9,I9c10dac9,I53bfff85,I06f7594d,I24bff8d4, ... into integration

* changes:
nxp lx2160a-aqds: new plat based on soc lx2160a
NXP lx2160a-rdb: new plat based on SoC lx2160a
nxp lx2162aqds: new plat based on soc lx2160a
nxp: errata handling at soc level for lx2160a
nxp: make file for loading additional ddr image
nxp: adding support of soc lx2160a
nxp: deflt hdr files for soc & their platforms
nxp: platform files for bl2 and bl31 setup
nxp: warm reset support to retain ddr content
nxp: nv storage api on platforms
nxp: supports two mode of trusted board boot
nxp: fip-handler for additional fip_fuse.bin
nxp: fip-handler for additional ddr-fip.bin
nxp: image loader for loading fip image
nxp: svp & sip smc handling
nxp: psci platform functions used by lib/psci
nxp: helper function used by plat & common code
nxp: add data handler used by bl31
nxp: adding the driver.mk file
nxp-tool: for creating pbl file from bl2
nxp: adding the smmu driver
nxp: cot using nxp internal and mbedtls
nxp:driver for crypto h/w accelerator caam
nxp:add driver support for sd and emmc
nxp:add qspi driver
nxp: add flexspi driver support
nxp: adding gic apis for nxp soc
nxp: gpio driver support
nxp: added csu driver
nxp: driver pmu for nxp soc
nxp: ddr driver enablement for nxp layerscape soc
nxp: i2c driver support.
NXP: Driver for NXP Security Monitor
NXP: SFP driver support for NXP SoC
NXP: Interconnect API based on ARM CCN-CCI driver
NXP: TZC API to configure ddr region
NXP: Timer API added to enable ARM generic timer
nxp: add dcfg driver
nxp:add console driver for nxp platform
tools: add mechanism to allow platform specific image UUID
tbbr-cot: conditional definition for the macro
tbbr-cot: fix the issue of compiling time define
cert_create: updated tool for platform defined certs, keys & extensions
tbbr-tools: enable override TRUSTED_KEY_CERT

show more ...

nxp: cot using nxp internal and mbedtls

Chain of trust(CoT) is enabled on NXP SoC in two ways:
- Using MbedTLS, parsing X509 Certificates.
- Using NXP internal method parsing CSF header

Signed-off-

nxp: cot using nxp internal and mbedtls

Chain of trust(CoT) is enabled on NXP SoC in two ways:
- Using MbedTLS, parsing X509 Certificates.
- Using NXP internal method parsing CSF header

Signed-off-by: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Change-Id: I78fb28516dfcfa667bebf8a1951ffb24bcab8de4

show more ...