fix(auth): correct sign-compare warning

Correct the warning due to comparison between signed and
unsigned variable.

drivers/auth/mbedtls/mbedtls_x509_parser.c: In function 'get_ext':
drivers/auth/m

fix(auth): correct sign-compare warning

Correct the warning due to comparison between signed and
unsigned variable.

drivers/auth/mbedtls/mbedtls_x509_parser.c: In function 'get_ext':
drivers/auth/mbedtls/mbedtls_x509_parser.c:120:30:
error: comparison of integer expressions of different
signedness: 'int' and 'size_t' {aka 'unsigned int'}
[-Werror=sign-compare]
120 | if ((oid_len == strlen(oid_str)) && !strcmp(oid, oid_str)) {
| ^~

Change-Id: Ic12527f5f92a34e925bee3047c168eacf5e99d8a
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@st.com>

show more ...

Merge pull request #1726 from antonio-nino-diaz-arm/an/includes

Sanitise includes across codebase

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- inclu

Sanitise includes across codebase

Enforce full include path for includes. Deprecate old paths.

The following folders inside include/lib have been left unchanged:

- include/lib/cpus/${ARCH}
- include/lib/el3_runtime/${ARCH}

The reason for this change is that having a global namespace for
includes isn't a good idea. It defeats one of the advantages of having
folders and it introduces problems that are sometimes subtle (because
you may not know the header you are actually including if there are two
of them).

For example, this patch had to be created because two headers were
called the same way: e0ea0928d5b7 ("Fix gpio includes of mt8173 platform
to avoid collision."). More recently, this patch has had similar
problems: 46f9b2c3a282 ("drivers: add tzc380 support").

This problem was introduced in commit 4ecca33988b9 ("Move include and
source files to logical locations"). At that time, there weren't too
many headers so it wasn't a real issue. However, time has shown that
this creates problems.

Platforms that want to preserve the way they include headers may add the
removed paths to PLAT_INCLUDES, but this is discouraged.

Change-Id: I39dc53ed98f9e297a5966e723d1936d6ccf2fc8f
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #925 from dp-arm/dp/spdx

Use SPDX license identifiers

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by

Use SPDX license identifiers

To make software license auditing simpler, use SPDX[0] license
identifiers instead of duplicating the license text in every file.

NOTE: Files that have been imported by FreeBSD have not been modified.

[0]: https://spdx.org/

Change-Id: I80a00e1f641b8cc075ca5a95b10607ed9ed8761a
Signed-off-by: dp-arm <dimitris.papastamos@arm.com>

show more ...

Merge pull request #844 from antonio-nino-diaz-arm/an/no-timingsafe

Revert "tbbr: Use constant-time bcmp() to compare hashes"

Revert "tbbr: Use constant-time bcmp() to compare hashes"

This reverts commit b621fb503c76f3bdf06ed5ed1d3a995df8da9c50.

Because of the Trusted Firmware design, timing-safe functions are not
needed.

Revert "tbbr: Use constant-time bcmp() to compare hashes"

This reverts commit b621fb503c76f3bdf06ed5ed1d3a995df8da9c50.

Because of the Trusted Firmware design, timing-safe functions are not
needed. Using them may be misleading as it could be interpreted as being
a protection against private data leakage, which isn't the case here.

For each image, the SHA-256 hash is calculated. Some padding is appended
and the result is encrypted with a private key using RSA-2048. This is
the signature of the image. The public key is stored along with BL1 in
read-only memory and the encrypted hash is stored in the FIP.

When authenticating an image, the TF decrypts the hash stored in the FIP
and recalculates the hash of the image. If they don't match, the boot
sequence won't continue.

A constant-time comparison does not provide additional security as all
the data involved in this process is already known to any attacker.
There is no private data that can leaked through a timing attack when
authenticating an image.

`timingsafe_bcmp()` is kept in the codebase because it could be useful
in the future.

Change-Id: I44bdcd58faa586a050cc89447e38c142508c9888
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #834 from douglas-raillard-arm/dr/use_dc_zva_zeroing

Use DC ZVA instruction to zero memory

Replace some memset call by zeromem

Replace all use of memset by zeromem when zeroing moderately-sized
structure by applying the following transformation:
memset(x, 0, sizeof(x)) => zeromem(x, sizeo

Replace some memset call by zeromem

Replace all use of memset by zeromem when zeroing moderately-sized
structure by applying the following transformation:
memset(x, 0, sizeof(x)) => zeromem(x, sizeof(x))

As the Trusted Firmware is compiled with -ffreestanding, it forbids the
compiler from using __builtin_memset and forces it to generate calls to
the slow memset implementation. Zeromem is a near drop in replacement
for this use case, with a more efficient implementation on both AArch32
and AArch64.

Change-Id: Ia7f3a90e888b96d056881be09f0b4d65b41aa79e
Signed-off-by: Douglas Raillard <douglas.raillard@arm.com>

show more ...

Merge pull request #817 from antonio-nino-diaz-arm/an/timingsafe

Import constant-time bcmp() and use it where necessary

tbbr: Use constant-time bcmp() to compare hashes

To avoid timing side-channel attacks, it is needed to use a constant
time memory comparison function when comparing hashes. The affected
code only ch

tbbr: Use constant-time bcmp() to compare hashes

To avoid timing side-channel attacks, it is needed to use a constant
time memory comparison function when comparing hashes. The affected
code only cheks for equality so it isn't needed to use any variant of
memcmp(), bcmp() is enough.

Also, timingsafe_bcmp() is as fast as memcmp() when the two compared
regions are equal, so this change incurrs no performance hit in said
case. In case they are unequal, the boot sequence wouldn't continue as
normal, so performance is not an issue.

Change-Id: I1c7c70ddfa4438e6031c8814411fef79fd3bb4df
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #812 from antonio-nino-diaz-arm/an/clear-static-vars

Clear static variables in X509 parser on error

Clear static variables in X509 parser on error

In mbedtls_x509_parser.c there are some static arrays that are filled
during the integrity check and then read whenever an authentication
parameter is

Clear static variables in X509 parser on error

In mbedtls_x509_parser.c there are some static arrays that are filled
during the integrity check and then read whenever an authentication
parameter is requested. However, they aren't cleared in case of an
integrity check failure, which can be problematic from a security
point of view. This patch clears these arrays in the case of failure.

Change-Id: I9d48f5bc71fa13e5a75d6c45b5e34796ef13aaa2
Signed-off-by: Antonio Nino Diaz <antonio.ninodiaz@arm.com>

show more ...

Merge pull request #572 from jcastillo-arm/jc/tbb_nvcounter

TBB NVcounter support

TBB: add non-volatile counter support

This patch adds support for non-volatile counter authentication to
the Authentication Module. This method consists of matching the
counter values provided in th

TBB: add non-volatile counter support

This patch adds support for non-volatile counter authentication to
the Authentication Module. This method consists of matching the
counter values provided in the certificates with the ones stored
in the platform. If the value from the certificate is lower than
the platform, the boot process is aborted. This mechanism protects
the system against rollback.

The TBBR CoT has been updated to include this method as part of the
authentication process. Two counters are used: one for the trusted
world images and another for the non trusted world images.

** NEW PLATFORM APIs (mandatory when TBB is enabled) **

int plat_get_nv_ctr(void *cookie, unsigned int *nv_ctr);

This API returns the non-volatile counter value stored
in the platform. The cookie in the first argument may be
used to select the counter in case the platform provides
more than one (i.e. TBSA compliant platforms must provide
trusted and non-trusted counters). This cookie is specified
in the CoT.

int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr);

This API sets a new counter value. The cookie may be
used to select the counter to be updated.

An implementation of these new APIs for ARM platforms is also
provided. The values are obtained from the Trusted Non-Volatile
Counters peripheral. The cookie is used to pass the extension OID.
This OID may be interpreted by the platform to know which counter
must return. On Juno, The trusted and non-trusted counter values
have been tied to 31 and 223, respectively, and cannot be modified.

** IMPORTANT **

THIS PATCH BREAKS THE BUILD WHEN TRUSTED_BOARD_BOOT IS ENABLED. THE
NEW PLATFORM APIs INTRODUCED IN THIS PATCH MUST BE IMPLEMENTED IN
ORDER TO SUCCESSFULLY BUILD TF.

Change-Id: Ic943b76b25f2a37f490eaaab6d87b4a8b3cbc89a

show more ...

Merge pull request #465 from jcastillo-arm/jc/tbb_mbedtls_2_x

Move up to mbed TLS 2.x

Move up to mbed TLS 2.x

The mbed TLS library has introduced some changes in the API from
the 1.3.x to the 2.x releases. Using the 2.x releases requires
some changes to the crypto and transport modul

Move up to mbed TLS 2.x

The mbed TLS library has introduced some changes in the API from
the 1.3.x to the 2.x releases. Using the 2.x releases requires
some changes to the crypto and transport modules.

This patch updates both modules to the mbed TLS 2.x API.

All references to the mbed TLS library in the code or documentation
have been updated to 'mbed TLS'. Old references to PolarSSL have
been updated to 'mbed TLS'.

User guide updated to use mbed TLS 2.2.0.

NOTE: moving up to mbed TLS 2.x from 1.3.x is not backward compatible.
Applying this patch will require an mbed TLS 2.x release to be used.
Also note that the mbed TLS license changed to Apache version 2.0.

Change-Id: Iba4584408653cf153091f2ca2ee23bc9add7fda4

show more ...

Merge pull request #315 from jcastillo-arm/jc/tbb_tmp9

Authentication Framework

TBB: add mbedTLS authentication related libraries

This patch adds the following mbedTLS based libraries:

* Cryptographic library

It is used by the crypto module to verify a digital signature
and a

TBB: add mbedTLS authentication related libraries

This patch adds the following mbedTLS based libraries:

* Cryptographic library

It is used by the crypto module to verify a digital signature
and a hash. This library relies on mbedTLS to perform the
cryptographic operations. mbedTLS sources must be obtained
separately.

Two key algorithms are currently supported:

* RSA-2048
* ECDSA-SECP256R1

The platform is responsible for picking up the required
algorithm by defining the 'MBEDTLS_KEY_ALG' variable in the
platform makefile. Available options are:

* 'rsa' (for RSA-2048) (default option)
* 'ecdsa' (for ECDSA-SECP256R1)

Hash algorithm currently supported is SHA-256.

* Image parser library

Used by the image parser module to extract the authentication
parameters stored in X509v3 certificates.

Change-Id: I597c4be3d29287f2f18b82846973afc142ee0bf0

show more ...