MAINTAINERS: fix Igor Opaniuk's email, make him a Poplar reviewer

Igor no longer works for Linaro and emails to igor.opaniuk@linaro.org
cannot be delivered. However, he still helps with the Poplar b

MAINTAINERS: fix Igor Opaniuk's email, make him a Poplar reviewer

Igor no longer works for Linaro and emails to igor.opaniuk@linaro.org
cannot be delivered. However, he still helps with the Poplar board, so
remove his old Linaro address from the general section and add him to
the Poplar section as a reviewer.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>
Acked-by: Igor Opaniuk <igor.opaniuk@gmail.com>

show more ...

Add support for Hisilicon Hi3519AV100 DEMO board

Hi3519AV100 is a high-performance and low-power 4K
Smart IP Camera SoC designed for IP cameras, action cameras,
panoramic cameras, rear view mirrors,

Add support for Hisilicon Hi3519AV100 DEMO board

Hi3519AV100 is a high-performance and low-power 4K
Smart IP Camera SoC designed for IP cameras, action cameras,
panoramic cameras, rear view mirrors, and UAVs. Hi3519A
V100 introduces H.265/H.264 encoding and decoding, with
performance up to 4K x 2K@60 fps and 1080p@240 fps.
For more information:
http://www.hisilicon.com/en/Products/ProductList/Surveillance

This patch has been tested using the following step,
1. Patch the uboot and Linux kernel with OP-TEE support if required
2. build step:
(1) make CROSS_COMPILE=arm-himix200-linux- PLATFORM=hisilicon
PLATFORM_FLAVOR=hi3519av100_demo (OPTEE-OS build)

(2) make CROSS_COMPILE_HOST=arm-himix200-linux- (OPTEE_CLIENT build)

(3) cross_compile openssl and replace optee_test/host/libopenssl

(4) make CROSS_COMPILE_HOST=arm-himix200-linux-
CROSS_COMPILE_TA=arm-himix200-linux-
TA_DEV_KIT_DIR=../optee_os/out/arm-plat-hisilicon/export-ta_arm32
COMPILE_NS_USER=32 (OPTEE_TEST build)

3. mkimage -A arm -T kernel -O tee -C none -d tee.bin uTee.optee
4. Boot setting in uboot:
nand read 0x22007fc0 0x100000 0x400000; /* load kernel */
tftp 0x30000000 uTee.optee;bootm 0x30000000;
5. after Linux startup, run daemon tee-supplicant
6. run xtest

Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Zeng Tao <prime.zeng@hisilicon.com>

show more ...

virt: add virtualization subsystem

This patch adds virtualization framework to OP-TEE.

Signed-off-by: Volodymyr Babchuk <vlad.babchuk@gmail.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

plat-bcm: Add Broadcom ARMv8-A SoC ns3

Add base platform support for Broadcom ns3 SoC.
Broadcom ns3 is ARMv8-A based SoS with Cortex-A72 cores
and GICv3. It is configured to run with TF-A.

Signed-o

plat-bcm: Add Broadcom ARMv8-A SoC ns3

Add base platform support for Broadcom ns3 SoC.
Broadcom ns3 is ARMv8-A based SoS with Cortex-A72 cores
and GICv3. It is configured to run with TF-A.

Signed-off-by: Sandeep Tripathy <sandeep.tripathy@broadcom.com>
Reviewed-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Pramod Kumar <pramod.kumar@broadcom.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

plat-ls: NXP LX2160ARDB platform support is added

Added support for armv8 platform flavour.
- PLATFORM = ls-lx2160ardb

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Jerome Foris

plat-ls: NXP LX2160ARDB platform support is added

Added support for armv8 platform flavour.
- PLATFORM = ls-lx2160ardb

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

Updating MAINTAINERS for NXP LS-RDB Platforms

Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>

plat-ls:add LS2088ARDB platform flavors

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Reviewed-by: Sahil Malhotra <sahil.malhotra@nxp.com>

plat-ls:add LS1088ARDB platform flavors

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.co

plat-ls:add LS1088ARDB platform flavors

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Sahil Malhotra <sahil.malhotra@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>

show more ...

plat-ls:add LS1012AFRWY platform flavors

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Sahil Malhotra <sahil.malhotra@nxp.c

plat-ls:add LS1012AFRWY platform flavors

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Reviewed-by: Sahil Malhotra <sahil.malhotra@nxp.com>

show more ...

Updating MAINTAINERS for LS1046A-RDB, LS1043A-RDB, LS1021

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Sumit Garg <sumit.garg@l

Updating MAINTAINERS for LS1046A-RDB, LS1043A-RDB, LS1021

Signed-off-by: Vinitha V Pillai <vinitha.pillai@nxp.com>
Reviewed-by: Pankaj Gupta <pankaj.gupta@nxp.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>

show more ...

plat-sunxi: Add Allwinner A64 support

This commit adds support for pine64[1] board based on
Allwinner's A64 SoC.

1. Build command

# make PLATFORM=sunxi-sun50i_a64

2. Pass optee_example_hello_

plat-sunxi: Add Allwinner A64 support

This commit adds support for pine64[1] board based on
Allwinner's A64 SoC.

1. Build command

# make PLATFORM=sunxi-sun50i_a64

2. Pass optee_example_hello_world and xtest.

[1]: https://www.pine64.org/

Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Amit Singh Tomar <amittomer25@gmail.com>

show more ...

imx: update README.md/MAINTAINERS

Update README.md to mark mx6qsabresd/sabrelite as actively maintained.
I tested with latest optee os/client/xtest, works well.

Simplify the MAINTAINERS entry for i

imx: update README.md/MAINTAINERS

Update README.md to mark mx6qsabresd/sabrelite as actively maintained.
I tested with latest optee os/client/xtest, works well.

Simplify the MAINTAINERS entry for i.MX with using i.MX family entry.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>

show more ...

MAINTAINERS: Change maintainer for Marvell Armada

Signed-off-by: Tao Lu <taolu@marvell.com>
Acked-by: Kevin Peng <kg-kevingarnett@hotmail.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

plat-stm32mp1: add initial support

Introduce platform stm32mp1 with board stm32mp1-stm32mp157c-ev1 based
on stm32mp1 SoC family integrating Arm Cortex-A7 technology. In its
default configuration, st

plat-stm32mp1: add initial support

Introduce platform stm32mp1 with board stm32mp1-stm32mp157c-ev1 based
on stm32mp1 SoC family integrating Arm Cortex-A7 technology. In its
default configuration, stm32mp1 OP-TEE core operates in a 256kB secure
RAM with pager support enabled.

Signed-off-by: Etienne Carriere <etienne.carriere@st.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

MAINTAINERS: Add MAINTAINERS entry for AllWinner H2+

This commit adds maintainer for this board.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.foriss

MAINTAINERS: Add MAINTAINERS entry for AllWinner H2+

This commit adds maintainer for this board.

Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ying-Chun Liu (PaulLiu) <paul.liu@linaro.org>

show more ...

Add new platform for the TI K3 class of SoCs

Add platform 'k3' for the TI K3 family. These are ARMv8 devices
and are quite different from our line of existing ARMv7 OMAP style
SoCs, hence the new pl

Add new platform for the TI K3 class of SoCs

Add platform 'k3' for the TI K3 family. These are ARMv8 devices
and are quite different from our line of existing ARMv7 OMAP style
SoCs, hence the new platform.

Signed-off-by: Andrew F. Davis <afd@ti.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>

show more ...

synquacer: Add DeveloperBox platform support

Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>

MAINTAINERS: mark Mediatek MT8173 EVB as Orphan

Mediatek MT8173 EVB is not used on a regular basis for OP-TEE by anyone
we know, so mark is as Orphan. I'm not getting rid of the platform code
becaus

MAINTAINERS: mark Mediatek MT8173 EVB as Orphan

Mediatek MT8173 EVB is not used on a regular basis for OP-TEE by anyone
we know, so mark is as Orphan. I'm not getting rid of the platform code
because is is small and quite trivial, so there is not much to be
gained by removing it.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Joakim Bech <joakim.bech@linaro.org>

show more ...

MAINTAINERS: Add MAINTAINERS entry for NXP WaARP7

This commit adds two maintainers for this board.

- Peng Fan who has done most of the i.MX7 work.
- Bryan O'Donoghue (me) very happily reusing all o

MAINTAINERS: Add MAINTAINERS entry for NXP WaARP7

This commit adds two maintainers for this board.

- Peng Fan who has done most of the i.MX7 work.
- Bryan O'Donoghue (me) very happily reusing all of Peng's work for WaRP7.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>

show more ...

MAINTAINERS: mark Xilinx Zynq UltraScale+ MPSOC as Orphan

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: Sören Brinkmann <soren.brinkmann@xilinx.com>
Reported-by: Joakim Bech <joa

MAINTAINERS: mark Xilinx Zynq UltraScale+ MPSOC as Orphan

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
CC: Sören Brinkmann <soren.brinkmann@xilinx.com>
Reported-by: Joakim Bech <joakim.bech@linaro.org>

show more ...

MAINTAINERS: add "THE REST"

Add a new entry to the maintainers list, which should remain the last
one and gives contact information for the overall project maintainers
and main reviewers.

Signed-of

MAINTAINERS: add "THE REST"

Add a new entry to the maintainers list, which should remain the last
one and gives contact information for the overall project maintainers
and main reviewers.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Igor Opaniuk <igor.opaniuk@linaro.org>
Acked-by: Joakim Bech <joakim.bech@linaro.org>
Acked-by: Victor Chong <victor.chong@linaro.org>

show more ...

Adopt format of Linux MAINTAINERS file

Our current MAINTAINERS.md file is quite impractical for two common use
cases:

1. Finding the platform maintainer(s) given a file path in the OP-TEE
OS source

Adopt format of Linux MAINTAINERS file

Our current MAINTAINERS.md file is quite impractical for two common use
cases:

1. Finding the platform maintainer(s) given a file path in the OP-TEE
OS source tree;
2. Contacting maintainers via GitHub (such as mentioning them in pull
requests).

To fix this, adopt the Linux format and extend the e-mail address field
to also contain an optional GitHub ID, such as:

John Doe <john.doe@example.com> [@johndoe]

Since the file is not in Markdown format anymore, drop the .md
extension as well.

Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Acked-by: Volodymyr Babchuk <vlad.babchuk@epam.com>
Acked-by: Etienne Carriere <etienne.carriere@linaro.org>
Acked-by: Akshay Bhat <akshay.bhat@timesys.com>
Acked-by: Jens Wiklander <jens.wiklander@linaro.org>
Acked-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Kevin Peng <kevinp@marvell.com>
Acked-by: Sumit Garg <sumit.garg@nxp.com>
Acked-by: Joakim Bech <joakim.bech@linaro.org>
Acked-by: Victor Chong <victor.chong@linaro.org>
Acked-by: Igor Opaniuk <igor.opaniuk@linaro.org>

show more ...